Advantages and Disadvantages of Fibre Optic Cable - GeeksforGeeks (2024)

Difference between Twisted pair cable, Co-axial cable and Optical fiber cable

Twisted Pair Cable: Wires are twisted together in pairs. Each pair would consist of a wire used for the positive data signal and a wire used for the negative data signal. Any noise that appears on the positive/negative wire of the pair would occur on the other wire. Because the wires are opposite polarities, these are 180 degrees out of phase (180

Difference between Fiber optic cable and Copper wire

1. Fiber Optic Cable: Fiber Optic Cable is also known as the Optical Fiber Cable. It is made up of plastic or glass. It transmits signals in the form of light. There are 3 basic components of the optical transmission system which are as follows: Light sourceTransmission media (fiber optics)Detector Advantages of Fiber optic cables: High bandwidth:

What is Fiber Optic Cable Splicing?

Fiber Optic Cable is a form of modern network cable that has a far greater capacity than electrical communication connections. optical fibers are made comprised of exceedingly tiny strands of glass or plastic and these cables transfer information between two sites using completely optical (light-based) technology. Fiber Optic Cable Splicing is the

What is an OSP Fiber Optic Cable?

OSP (outside plant) refers to all of the equipment, cables, and infrastructure that are located outside of a building, and hence OSP fiber optic or Outside Plant fiber optic cable is fiber optic cables that are installed outside the plant, they are different than the normal fiber optic cables as they are designed to withstand the installation and s

Optical Fibre Cable

Data transfer and telecommunications have been transformed by optical fiber technology. It consists of tiny glass or plastic fibers that can carry data as light pulses. In the 1960s, modern optical fiber was created. The first low-loss optical fiber was created in 1970 by Robert Maurer, Donald Keck, and Peter Schultz at Corning Glass Works (now Cor

Difference between Twisted Pair Cable and Optical Fiber Cable

Prerequisite – Types of Transmission Media Twisted Pair Cable: It is a type of wiring in which two conductors are twisted together to form a circuit for transmission purposes. It is formed by combining two separate insulated copper wires. Metallic conducting wire present in twisted pair cable is used in the transfer of data in the form of electric

Difference Between Coaxial Cable and Twisted Pair Cable

In the sector of networking and telecommunication cables are very important since they would help transfer information from one device to the other. The most common types of cables include the coaxial cable together with the twisted pair cables. All these cables are said to be built in such a way that they are not connected, each has its advantages

Satellite and Fibre Internet

Over the years, the technology has evolved and improved a lot. With more and more apps and facilities being released every now and then, the need for faster and better mediums of internet access has become a major problem. Addressing this need, two emerging mediums, Satellite and Fibre internet, have risen to the forefront, each offering unique adv

Fundamentals of Fibre Channel

Fibre Channel is a high-speed network technology used to connect server to data storage area network. It handles high performance of disk storage for applications on many corporate networks. It supports data backup and replication. Fibre Channel is needed, as it is very flexible and enables the transfer of data at a faster speed. The topologies, th

FCP (Fibre Channel Protocol)

Protocol means a set of instructions or rules and regulations. So, instead of first learning about fiber channel protocol, let's get into what a fiber channel is: Fibre Channel is a high-speed networking technology primarily used for transmitting data among data centers, computer servers, switches, and storage at data rates of up to 128 Gbps with d

Fibre Channel Layers

Pre-requisites: Fibre Channel, FCP (Fibre Channel Protocol) Fibre Channel is a high-speed data transfer protocol providing in-order, lossless delivery of raw block data. Fibre Channel is primarily used to connect computer data storage to servers in storage area networks in commercial data centres. layers of Fibre Channel 1. Fibre Channel FC-0 Overv

Advantages and Disadvantages of LAN, MAN and WAN

Pre-requisites: Difference between LAN, MAN, and WAN A computer network is a system that connects numerous independent computers in order to share information (data) and resources. In this article, we will see the advantages and disadvantages of LAN, MAN, and WAN. Advantages of LANSimple and reasonable cost: The primary benefit of the local area ne

Difference between Optical Fiber and Coaxial Cable

Both Optical fiber Cable and Coaxial Cable are the types of guided media. Optical fiber Cable: Optical Fiber is the type of guided media is made of plastics and glasses which is used to transmit the signal is in light form or optical form. It provides the high bandwidth (B). Its Installation and implementation is not so easy like coaxial cable. Coa

Difference between ADSL and Cable Modem

In Computer Network, there are two broadband internet connections exist namely ADSL (Asymmetric Digital Subscriber Line) and Cable Modem. Comparing and distinguishing these technologies can assist the users to make appropriate choice depending on the requirement they have. In this article we will see difference between ADSL and Cable Modem includin

Advantages and Disadvantages of Subnetting

Subnetting: Dividing a network into many small Networks is known as Subnetting. Subnetting is useful in many ways like: It provides security to one network from another network. eg) In an Organisation, code of the Developer department must not be accessed by another department.It may be possible that a particular subnet might need higher network pr

Advantages and Disadvantages of Computer Networking

Pre-requisites: What is Computer Networking? The computer network is defined as a set of interconnected autonomous systems that facilitate distributed processing of information. It results in better performance with a high speed of processing. Computer Networks can be defined as collections of two or more computer networks that are linked together.

Advantages and Disadvantages of Hybrid Topology

Pre-Requisite: Types of Network Topology Hybrid Topology is the first before going into the topic, we saw that topology may be a connection of varied links and nodes, communicating with one another for the transfer of knowledge. During this process sort of topology, we combine two or more different topologies to make a resultant topology that has g

Advantages and Disadvantages of Telecommunication

“Communications technology is a crucial part of both today's and tomorrow’s society.” Telecommunication also referred to as e-commuting or e-work, is that the term used when individuals cash in on the various technological advances to figure from anywhere they desire, giving themselves. Furthermore, it's important to notice that telecommuting shoul

Advantages and disadvantages of Remote Communication Technology

Remote Communication could be a sort of information communication in which data is transmitted and gotten between two or more gadgets without any utilize of wire or cable. Remote communication is the exchange of data or control between two or more focuses that are not associated by an electrical conductor. The foremost common remote advances utiliz

Advantages and Disadvantages of Radio Transmission

Practically all organizations utilize radio waves for information transmission, e.g., GSM at 900, 1800, and 1900 MHz, DECT at 1880 MHz and so on Radio transmission innovations can be utilized to set up specially appointed associations for work gatherings, to an interface, e.g., a work area with a printer without a wire, or to help portability insid

Advantages and disadvantages of Wireless Communication

The interconnection of systems, people, or things with the help of a communication media can be referred to as a network. The type of communication which use electromagnetic waves as communication media for transmitting and receiving data or voice is called wireless communication. The electromagnetic spectrum is divided into a well-defined channel

Advantages and Disadvantages of Satellite Communication

Satellite communication is an electronic communication package placed in an orbit. Its prime objective is to initiate or assist through space. It has made a major contribution to the pattern of international communication. The satellite microwave is basically a microwave relay station in space. It uses a geosynchronous satellite to relay the radio

Advantages and Disadvantages of Long Term Evolution (LTE) technology

Long Term Evolution (LTE) technology is very famous nowadays (2020). This is because of the increasing usage of 4G smartphones that use this technology. LTE is the project name given to the development of a high-performance air interface for cellular mobile communication systems. It is used for advancing a series of mobile telecommunications system

Advantages and Disadvantages of ring topology

Ring Topology may be a network configuration where device connections create a circular data path. In this each device is connected to with its exactly two neighboring devices, like points on a circle which forms like a ring structure. A number of repeaters are used for Ring topology with a large number of nodes to send data and to prevent data los

Advantages and disadvantages of Ethernet

Ethernet is Local Area Network (LAN) technology. This system consists of rules to connect multiple systems on the LAN network connection. Apart from LAN, it is also used in Metropolitan Area Network (MAN) and Wide Area Network (WAN) network. A system for connecting a number of computer systems to form a local area network, with rules to control the

Advantages and Disadvantages of WLAN

Nowadays, more and more networks are operating without cables, within the wireless mode. Wireless LANs use high-frequency radio signals, infrared beams, or lasers to speak between the workstations, file servers, or hubs. Wireless LAN is formed by connecting different devices through wireless communication to form an area network. WLAN follows a typ

Advantages and Disadvantages of Tree Topology

Network topology is the systematic arrangement of the elements (links, nodes, etc.) of a communication network. Network topology can be used to make understand that it is the arrangement of various types of telecommunication networks which includes command and control radio networks, industrial field busses, and other essential network. Tree Topolo

Advantages and Disadvantages of Twisted Pair

Network cables are used in communication systems around the world. Using the correct cable will ensure the best performance of the network. Therefore, whether the correct cable is selected according to the requirements of the system will play a crucial role in whether the installed communication system can play an ideal use effect. Twisted Pair : T

Advantages and disadvantages of GPS

Global Positioning System (GPS) may be a satellite-based positioning system which is owned by our government and by Air Force of us. Elemental technique of GPS is to amount ranges between receiver and at an equivalent time ascertain observed satellites. Positions of the satellites are forecasted and broadcasted alongside GPS signal to the user. Thr

Advantages and Disadvantages of Optical character Reader (OCR)

Optical character Reader (OCR) helps in differentiating presence of characters by their shapes. OCR is employed as data input device to read numeric and alphanumeric characters from pre-printed documents produced by printers, type-writers etc. Level of accuracy to scan characters accurately is based on how clear writing is. Scanners are improved to