amiibo Does Not Work or Does Not Scan on Nintendo Switch (2024)

If this amiibo worked previously but now it does not, do the following:

1. Restart the console by holding down the POWER Button for three seconds, then select "Power Options" > "Restart."
2. Ensure nothing is obstructing the NFC touchpoint over the control stick on the right Joy-Con.
   • If a cover is being used on the right Joy-Con, remove it temporarily.
3. With the console undocked, attach the Joy-Con to the console.
4. Start the amiibo-compatible software and touch the amiibo to the NFC touchpoint.
5. Reset the amiibo data.

If the amiibo can still not be scanned correctly, test another amiibo on the right Joy-Con, or test the original amiibo on a different right Joy-Con or on a Nintendo Switch Pro Controller.

• If another amiibo works on the right Joy-Con, then the problem lies with the original amiibo and it will need to be replaced.

Situation Not Resolved:

If the Joy-Con is unable to scan any amiibo, or if the amiibo can be scanned using a different Joy-Con or a Pro Controller, then the original right Joy-Con controller will need to be repaired.

Please click here to book a repair.

1. Ensure you are using an amiibo figure or amiibo card.
   • The model number on the bottom of the amiibo should read NVL-001 or NVL-201.
   • If either of these model numbers are not printed on the amiibo, then it is not a licensed accessory. Using an amiibo should resolve the issue.
2. Ensure nothing is obstructing the NFC touchpoint over the control stick on the right Joy-Con.
   • If a cover is being used on the right Joy-Con, remove it temporarily.
3. With the console undocked, attach the Joy-Con to the console.
4. Register the amiibo.
   • Ensure you are not moving the amiibo while reading or writing data.

Were you able to register the amiibo using the right Joy-Con?

Yes No

If this amiibo worked previously but now it does not, do the following:

1. Restart the console by holding down the POWER Button for three seconds, then select "Power Options" > "Restart."
2. Start the amiibo-compatible software and touch the amiibo to the NFC touchpoint on the Pro Controller, ensuring that nothing is obstructing it.
   • On the Pro Controller, the NFC touchpoint is located over the Nintendo Switch logo at the top-center of the controller, not over the right joystick.
   
3. Reset the amiibo data.

If the amiibo can still not be scanned correctly, test another amiibo on the Nintendo Switch Pro Controller, or test the original amiibo on the right Joy-Con.

• If another amiibo works on the Pro Controller, then the problem lies with the original amiibo and it will need to be replaced.

Situation Not Resolved:

If the Pro Controller is unable to scan any amiibo, or if the amiibo can be scanned using the right Joy-Con, then the Pro Controller will need to be repaired.

Please click here to book a repair.

1. Ensure you are using an amiibo figure or amiibo card.
   • The model number on the bottom of the amiibo should read NVL-001 or NVL-201.
   • If either of these model numbers are not printed on the amiibo, then it is not a licensed accessory. Using an amiibo should resolve the issue.
2. Register the amiibo, making sure you are scanning the amiibo in the correct place.
   • On the Pro Controller, the NFC touchpoint is located over the Nintendo Switch logo at the top-center of the controller, not over the right joystick.
   
3. Ensure you are not moving the amiibo while reading or writing data.

Were you able to register the amiibo using the Pro Controller?

Yes No

If this amiibo worked previously but now it is not, try the following:

• Restart the console by holding down the POWER Button for three seconds, then select "Power Options" > "Restart."
• Ensure nothing is obstructing the NFC touchpoint over the right control stick.
• Start the amiibo-compatible software and touch the amiibo to the NFC touchpoint.
• Reset the amiibo data.
• Try registering a different amiibo.
  • If another amiibo works then the problem lies with the original amiibo and it will need to be replaced.

    The retailer from which you purchased the amiibo may be able to replace it. This will depend on the retailer's return policies. Nintendo cannot repair or replace amiibo directly.

• Pair a supported wireless controller (right Joy-Con or Nintendo Switch Pro Controller) and register the original amiibo on it.
  • If the amiibo works on a supported wireless controller, but not directly on the console, there is likely a problem with the Nintendo Switch Lite and it will need to be repaired.

• Please click here to book a repair.

1. Ensure you are using an amiibo figure or amiibo card.
   • The model number on the bottom of the amiibo should read NVL-001 or NVL-201.
   • If either of these model numbers are not printed on the amiibo, then it is not a licensed accessory. Using an amiibo should resolve the issue.
2. Ensure nothing is obstructing the NFC touchpoint over the right control stick.
3. Register the amiibo.
   • Ensure you are not moving the amiibo while reading or writing data.

Were you able to register the amiibo on the right control stick?

Yes No