@angular/cli (2024)

Angular CLI

Note

If you are updating from a beta or RC version, check out our 1.0 Update Guide.

If you wish to collaborate, check out our issue list.

Before submitting new issues, have a look at issues marked with the type: faq label.

Prerequisites

Both the CLI and generated project have dependencies that require Node 8.9 or higher, togetherwith NPM 5.5.1 or higher.

Installation
Usage
Generating a New Project
Generating Components, Directives, Pipes and Services
Updating Angular CLI
Development Hints for working on Angular CLI
Documentation
License

Installation

BEFORE YOU INSTALL: please read the prerequisites

Install Globally

npm install -g @angular/cli

Install Locally

npm install @angular/cli

To run a locally installed version of the angular-cli, you can call ng commands directly by adding the .bin folder within your local node_modules folder to your PATH. The node_modules and .bin folders are created in the directory where npm install @angular/cli was run upon completion of the install command.

Alternatively, you can install npx and run npx ng <command> within the local directory where npm install @angular/cli was run, which will use the locally installed angular-cli.

Install Specific Version (Example: 6.1.1)

npm install -g @angular/cli@6.1.1

Usage

ng help

Generating and serving an Angular project via a development server

ng new PROJECT-NAMEcd PROJECT-NAMEng serve

Navigate to http://localhost:4200/. The app will automatically reload if you change any of the source files.

You can configure the default HTTP host and port used by the development server with two command-line options :

ng serve --host 0.0.0.0 --port 4201

Generating Components, Directives, Pipes and Services

You can use the ng generate (or just ng g) command to generate Angular components:

ng generate component my-new-componentng g component my-new-component # using the alias# components support relative path generation# if in the directory src/app/feature/ and you runng g component new-cmp# your component will be generated in src/app/feature/new-cmp# but if you were to runng g component ./newer-cmp# your component will be generated in src/app/newer-cmp# if in the directory src/app you can also runng g component feature/new-cmp# and your component will be generated in src/app/feature/new-cmp

You can find all possible blueprints in the table below:

Scaffold	Usage
Component	`ng g component my-new-component`
Directive	`ng g directive my-new-directive`
Pipe	`ng g pipe my-new-pipe`
Service	`ng g service my-new-service`
Class	`ng g class my-new-class`
Guard	`ng g guard my-new-guard`
Interface	`ng g interface my-new-interface`
Enum	`ng g enum my-new-enum`
Module	`ng g module my-module`

angular-cli will add reference to components, directives and pipes automatically in the app.module.ts. If you need to add this references to another custom module, follow these steps:

ng g module new-module to create a new module
call ng g component new-module/new-component

This should add the new component, directive or pipe reference to the new-module you've created.

Updating Angular CLI

If you're using Angular CLI 1.0.0-beta.28 or less, you need to uninstall angular-cli package. It should be done due to changing of package's name and scope from angular-cli to @angular/cli:

npm uninstall -g angular-clinpm uninstall --save-dev angular-cli

To update Angular CLI to a new version, you must update both the global package and your project's local package.

Development Hints for working on Angular CLI

Working with master

git clone https://github.com/angular/angular-cli.gityarnnpm run buildcd dist/@angular/clinpm link

npm link is very similar to npm install -g except that instead of downloading the packagefrom the repo, the just built dist/@angular/cli/ folder becomes the global package.Additionally, this repository publishes several packages and we use special logic to load all of themon development setups.

Any changes to the files in the angular-cli/ folder will immediately affect the global @angular/cli package,meaning that, in order to quickly test any changes you make to the cli project, you should simply just run npm run buildagain.

Now you can use @angular/cli via the command line:

ng new foocd foonpm link @angular/cling serve

npm link @angular/cli is needed because by default the globally installed @angular/cli just loadsthe local @angular/cli from the project which was fetched remotely from npm.npm link @angular/cli symlinks the global @angular/cli package to the local @angular/cli package.Now the angular-cli you cloned before is in three places:The folder you cloned it into, npm's folder where it stores global packages and the Angular CLI project you just created.

You can also use ng new foo --link-cli to automatically link the @angular/cli package.

Please read the official npm-link documentationand the npm-link cheatsheet for more information.

To run the Angular CLI E2E test suite, use the node ./tests/legacy-cli/run_e2e command.It can also receive a filename to only run that test (e.g. node ./tests/legacy-cli/run_e2e tests/legacy-cli/e2e/tests/build/dev-build.ts).

As part of the test procedure, all packages will be built and linked.You will need to re-run npm link to re-link the development Angular CLI environment after tests finish.

Debugging with VS Code

In order to debug some Angular CLI behaviour using Visual Studio Code, you can run npm run build, and then use a launch configuration like the following:

{ "type": "node", "request": "launch", "name": "ng serve", "cwd": "<path to an Angular project generated with Angular-CLI>", "program": "${workspaceFolder}/dist/@angular/cli/bin/ng", "args": [ "<ng command>", ...other arguments ], "console": "integratedTerminal"}

Then you can add breakpoints in dist/@angular files.

For more informations about Node.js debugging in VS Code, see the related VS Code Documentation.

CPU Profiling

In order to investigate performance issues, CPU profiling is often useful.

Creating a profile

Node.js 16+ users can use the Node.js command line argument --cpu-prof to create a CPU profile.

node --cpu-prof node_modules/.bin/ng build

In addition to this one, another, more elaborated way to capture a CPU profile using the Chrome Devtools is detailed in https://github.com/angular/angular-cli/issues/8259#issue-269908550.

Opening a profile

You can use the Chrome Devtools to process it. To do so:

open chrome://inspect in Chrome
click on "Open dedicated DevTools for Node"
go to the "profiler" tab
click on the "Load" button and select the generated .cpuprofile file
on the left panel, select the associated file

Documentation

The documentation for the Angular CLI is located on our documentation website.

License

MIT