Chain Link Fence Specifications (2024)

FAQs

What are the specification of chain link fence? ›

SPACING FENCE POSTS

As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer's instructions for spacing, which typically ranges from 4-10' apart—spacing should not exceed 10' on-center. (fig.

For residential fences, line posts are needed at least every 8 feet. For commercial fences, the spacing can be up to 10 feet because of the stronger grade of the frame and mesh.

Chain Link Fence Height Average – 4 Feet

Chain link fences are usually 4′ tall, but they come in many different sizes. Common heights for chain link fences include: 3′, 3'6″, 4′, 5′, 6′, 7′, 8′, 10′, and 12′. As with any fence material, chain link fences can be customized to almost any height.

When it comes to hole depth, as a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post). The minimum hole diameter should measure four times the largest cross-section of the post.

Most residential and commercial fences are made from a 9-gauge chain link with a 2-inch diamond pattern. Temporary fences often are made from thinner 11- or 11½-gauge wire. If you're fencing a high-security property, a 6 gauge works best, while a 9 gauge works perfectly fine if you're fencing a typical home.

Despite most experts recommending concrete to set chain link fence posts, an approved cement with ASTM E 488-96 offers large amounts of strength to anchor various posts in concrete and masonry elements.

While specific spacing requirements vary based on fence type and purpose, a good rule of thumb for standard fence post spacing is 6 to 8 feet. This spacing provides a solid foundation for most fence types and ensures adequate support for the fence panels or pickets.

While installing a chain link fence, you may be worried about how to attach it to T-posts. We can use several tools, such as T-post clips, zip ties, or pieces of metal wires, to attach chain link fences to T-posts. The main thing is to keep the fence stretched while installation.

Chain link fence posts are typically spaced a maximum of ten feet apart. For aesthetic reasons, space posts evenly, but do NOT exceed ten feet between posts. If you plan on installing privacy slats or another type of material that will increase wind load, consider using 8' or 6' post spacing.

Do I need a top rail for a chain link fence? ›

Having a top rail on your chain link fence is a key component to ensuring your fence is sturdy and built to last. The top rail of a chain link fence provides the needed structure to the fence and prevents the fabric from sagging or buckling.

So, how far apart should fence posts be? The standard spacing for fence posts is 8 to 25 feet apart, depending on the type of fence. A standard wood fence would require posts 8 feet apart, while a high-tensile wire could span 25 feet.

Chain Link Fence Posts Spacing

Chain link fence posts should never be placed further than 10 feet apart. The weight of the chain link mesh fabric, the terrain and landscape, and privacy slats or windscreens may influence how often you place your fence posts.

The height of terminal post above level ground should equal to the height of the fabric plus 2 inches. Put the post in the center of the hole and make sure the post is plumb and set at the right height.

Weave a temporary tension bar about 3ft from your end post. Then attach a stretcher bar to the tension bar. Attach a fence puller to the stretcher bar and the end post, then crank the tool to tighten the mesh. The mesh is tight enough when you can squeeze around 2-4 cm with your hands in the tensioned area of mesh.

The strength of chain link fence framework is directly related to the gauge (ga.) of the steel. Common gauges of residential chain link fence include 20, 19, 18, 17, 16 and 15. Residential chain link fence framework should be manufactured from steel that has minimum yield strength of 45,000 pounds per square inch.

There are a few different types of chain-link fencing available on the market, each with its own unique benefits and drawbacks. The most common types are: Galvanized chain-link fencing. PVC coated chain-link fencing.

The most common size is 4' wide and can range from 3'–6' wide. This gate is perfect for those looking to purchase the most simple fencing option.