Chevrolet Performance LT4 Supercharged 6.2L V8 Engine | Buy a Supercharged Chevy LT4 Crate Engine Online (2024)

Engines & Components
Engine - Assembled / Ready-to-Run
Chevrolet Performance LT4 Supercharged 6.2L Crate Engine -V8/650HP

The all-new LT4 supercharged 6.2L V8 is the latest high-tech small-block crate engine from Chevrolet Performance. The perfect balance of performance and efficiency, the LT4 leverages the technologies introduced on the 2014 Corvette Stingray's LT1 Gen-V small block, including Direct Injection and continuously Variable Valve Timing. The LT4 is based on the same architecture as the LT1 engine, with several unique features designed to support its higher output and the greater cylinder pressures created by forced induction.

It includes the Rotocast A356T6 aluminum cylinder heads that are stronger and handle heat better than conventional castings, lightweight titanium intake valves and stronger forged aluminum pistons. While advancing the supercharging technologies established with the previous-generation Corvette ZR1's LS9 engine. This engine features the more-efficient, more-compact 1.7L Eaton R1740 TVS supercharger, which spins at up to 20,000 rpm. That's enough to generate more than 9 pounds of boost. The result is a surprisingly efficient engine capable of producing 650 horsepower and 650 lb-ft of torque. This LT4 crate engine is offered with a wet-sump or dry-sump oiling system. A controller specially designed for retro-fit application is available. There are also all-new transmission installation kits specially designed to match the LT4 and its 8-bolt crankshaft flange with Chevrolet Performances 4L-series four-speed automatic transmissions and the T-56 Super Magnum six-speed manual.

LT4 376ci / 6.2L TECH SPECS:

Engine Type: Direct injection spark ignition Gen V Small-Block V8
Displacement: 376ci (6.2L)
Bore x Stroke: 4.065'' x 3.622'' (103.25 x 92mm)
Block: Cast aluminum with 6-bolt, cross-bolted main bearing caps
Crankshaft: Forged steel, 8-bolt
Connecting Rods: Forged powdered-metal steel
Pistons: Forged aluminum
Compression Ratio: 10.0:1
Camshaft Type: Billet steel hydraulic roller
Valve Lift: .492'' intake/ .551'' exhaust
Camshaft Duration (@.050 in.): 189° intake / 223° exhaust
Cylinder Heads: A356T6 Rotocast aluminum, As-cast with 65.5cc combustion chamber
Valve Size: 2.130'' intake / 1.590'' exhaust
Rocker Arms: Investment-cast, roller trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium
Maximum Recommended RPM: 6600
Reluctor Wheel: 58X
Balanced: Internal

JEGS Easy Kits are designed by JEGS high performance racing professionals to help you get all the performance parts you need for your race car, hot rod or truck.