Name
interface bvi — global
Synopsis
interface bvibridge-group-numberno interface bvibridge-group-number
Configures
Bridging
Default
None
Description
The Bridge-Group VirtualInterface (BVI) becomes available on routers when thebridge irb command has beengiven. This interface allows the router to route and bridge the sameprotocol over the same interface. Thebridge group-number must match the bridge groupdefined for the bridge.
Example
In this configuration, serial0 andserial1 are bridged, and traffic is routed throughthose interfaces out through ethernet0:
bridge irbbridge 1 protocol ieee!interface serial0 bridge-group 1!interface serial bridge-group 1!interface ethernet 0 ip address 10.11.1.1 255.255.255.0!! Configure the virtual bvi interface with a bridge group number of 1interface bvi 1 ip address 10.10.3.1 255.255.255.0!! Now configure the routing for the bridgebridge 1 route ip
Get CISCO IOS in a Nutshell now with the O’Reilly learning platform.
O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.
