Deploying a smart contract using Hardhat | Base (2024)

This section will guide you through deploying an NFT smart contract (ERC-721) on the Base test network using Hardhat.

Hardhat is a developer tool that provides a simple way to deploy, test, and debug smart contracts.

Objectives​

By the end of this tutorial, you should be able to do the following:

• Setup Hardhat for Base
• Create an NFT smart contract for Base
• Compile a smart contract for Base
• Deploy a smart contract to Base
• Interact with a smart contract deployed on Base

Prerequisites​

Node v18+​

This tutorial requires you have Node version 18+ installed.

• Download Node v18+

If you are using nvm to manage your node versions, you can just run nvm install 18.

Coinbase Wallet​

In order to deploy a smart contract, you will first need a web3 wallet. You can create a wallet by downloading the Coinbase Wallet browser extension.

• Download Coinbase Wallet

Wallet funds​

Deploying contracts to the blockchain requires a gas fee. Therefore, you will need to fund your wallet with ETH to cover those gas fees.

For this tutorial, you will be deploying a contract to the Base Sepolia test network. You can fund your wallet with Base Sepolia ETH using one of the faucets listed on the Base Network Faucets page.

Creating a project​

Before you can begin deploying smart contracts to Base, you need to set up your development environment by creating a Node.js project.

To create a new Node.js project, run:

npm init --y

Next, you will need to install Hardhat and create a new Hardhat project

To install Hardhat, run:

npm install --save-dev hardhat

To create a new Hardhat project, run:

npx hardhat init

Select Create a TypeScript project then press enter to confirm the project root.

Select y for both adding a .gitignore and loading the sample project. It will take a moment for the project setup process to complete.

Configuring Hardhat with Base​

In order to deploy smart contracts to the Base network, you will need to configure your Hardhat project and add the Base network.

To configure Hardhat to use Base, add Base as a network to your project's hardhat.config.ts file:

import { HardhatUserConfig } from 'hardhat/config';
import '@nomicfoundation/hardhat-toolbox';

require('dotenv').config();

const config: HardhatUserConfig = {
 solidity: {
 version: '0.8.23',
 },
 networks: {
 // for mainnet
 'base-mainnet': {
 url: 'https://mainnet.base.org',
 accounts: [process.env.WALLET_KEY as string],
 gasPrice: 1000000000,
 },
 // for testnet
 'base-sepolia': {
 url: 'https://sepolia.base.org',
 accounts: [process.env.WALLET_KEY as string],
 gasPrice: 1000000000,
 },
 // for local dev environment
 'base-local': {
 url: 'http://localhost:8545',
 accounts: [process.env.WALLET_KEY as string],
 gasPrice: 1000000000,
 },
 },
 defaultNetwork: 'hardhat',
};

export default config;

Install Hardhat toolbox​

The above configuration uses the @nomicfoundation/hardhat-toolbox plugin to bundle all the commonly used packages and Hardhat plugins recommended to start developing with Hardhat.

To install @nomicfoundation/hardhat-toolbox, run:

npm install --save-dev @nomicfoundation/hardhat-toolbox

Loading environment variables​

The above configuration also uses dotenv to load the WALLET_KEY environment variable from a .env file to process.env.WALLET_KEY. You should use a similar method to avoid hardcoding your private keys within your source code.

To install dotenv, run:

npm install --save-dev dotenv

Once you have dotenv installed, you can create a .env file with the following content:

WALLET_KEY="<YOUR_PRIVATE_KEY>"

Substituting <YOUR_PRIVATE_KEY> with the private key for your wallet.

Local Networks​

You can run the Base network locally, and deploy using it. If this is what you are looking to do, see the repo containing the relevant Docker builds.

It will take a very long time for your node to sync with the network. If you get errors that the nonce has already been used when trying to deploy, you aren't synced yet.

For quick testing, such as if you want to add unit tests to the below NFT contract, you may wish to leave the defaultNetwork as 'hardhat'.

Compiling the smart contract​

Below is a simple NFT smart contract (ERC-721) written in the Solidity programming language:

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;

import "@openzeppelin/contracts/token/ERC721/ERC721.sol";

contract NFT is ERC721 {
 uint256 public currentTokenId;

 constructor() ERC721("NFT Name", "NFT") {}

 function mint(address recipient) public payable returns (uint256) {
 uint256 newItemId = ++currentTokenId;
 _safeMint(recipient, newItemId);
 return newItemId;
 }
}

The Solidity code above defines a smart contract named NFT. The code uses the ERC721 interface provided by the OpenZeppelin Contracts library to create an NFT smart contract. OpenZeppelin allows developers to leverage battle-tested smart contract implementations that adhere to official ERC standards.

To add the OpenZeppelin Contracts library to your project, run:

npm install --save @openzeppelin/contracts

In your project, delete the contracts/Lock.sol contract that was generated with the project and add the above code in a new file called contracts/NFT.sol. (You can also delete the test/Lock.ts test file, but you should add your own tests ASAP!).

To compile the contract using Hardhat, run:

npx hardhat compile

Deploying the smart contract​

Once your contract has been successfully compiled, you can deploy the contract to the Base Sepolia test network.

To deploy the contract to the Base Sepolia test network, you'll need to modify the scripts/deploy.ts in your project:

import { ethers } from 'hardhat';

async function main() {
 const nft = await ethers.deployContract('NFT');

 await nft.waitForDeployment();

 console.log('NFT Contract Deployed at ' + nft.target);
}

// We recommend this pattern to be able to use async/await everywhere
// and properly handle errors.
main().catch((error) => {
 console.error(error);
 process.exitCode = 1;
});

You'll also need testnet ETH in your wallet. See the prerequisites if you haven't done that yet. Otherwise, the deployment attempt will fail.

Finally, run:

npx hardhat run scripts/deploy.ts --network base-sepolia

The contract will be deployed on the Base Sepolia test network. You can view the deployment status and contract by using a block explorer and searching for the address returned by your deploy script. If you've deployed an exact copy of the NFT contract above, it will already be verified and you'll be able to read and write to the contract using the web interface.

npx hardhat run scripts/deploy.ts --network base-mainnet

Regardless of the network you're deploying to, if you're deploying a new or modified contract, you'll need to verify it first.

Verifying the Smart Contract​

If you want to interact with your contract on the block explorer, you, or someone, needs to verify it first. The above contract has already been verified, so you should be able to view your version on a block explorer already. For the remainder of this tutorial, we'll walk through how to verify your contract on Base Sepolia testnet.

In hardhat.config.ts, configure Base Sepolia as a custom network. Add the following to your HardhatUserConfig:

etherscan: {
 apiKey: {
 "base-sepolia": "PLACEHOLDER_STRING"
 },
 customChains: [
 {
 network: "base-sepolia",
 chainId: 84532,
 urls: {
 apiURL: "https://api-sepolia.basescan.org/api",
 browserURL: "https://sepolia.basescan.org"
 }
 }
 ]
 },

Now, you can verify your contract. Grab the deployed address and run:

npx hardhat verify --network base-sepolia <deployed address>

You should see an output similar to:

Nothing to compile
No need to generate any newer typings.
Successfully submitted source code for contract
contracts/NFT.sol:NFT at 0x6527E5052de5521fE370AE5ec0aFCC6cD5a221de
for verification on the block explorer. Waiting for verification result...

Successfully verified contract NFT on Etherscan.

Error in plugin @nomiclabs/hardhat-etherscan: The API responded with an unexpected message.
Contract verification may have succeeded and should be checked manually.
Message: Already Verified

Search for your contract on Blockscout or Basescan to confirm it is verified.

Interacting with the Smart Contract​

If you verified on Basescan, you can use the Read Contract and Write Contract tabs to interact with the deployed contract. You'll need to connect your wallet first, by clicking the Connect button.