Five Steps To Select The Perfect Ceiling Medallion (2024)

FAQs

Five Steps To Select The Perfect Ceiling Medallion? ›

If you're wondering which size medallion you should purchase for your light fixture, a good rule of thumb is to consider the size of the room rather than the light itself. Measure the length and width of your room in feet. Multiple the length and the width, then divide by 7.

If you're wondering which size medallion you should purchase for your light fixture, a good rule of thumb is to consider the size of the room rather than the light itself. Measure the length and width of your room in feet. Multiple the length and the width, then divide by 7.

Using a large bit, drill a hole in the center of the medallion to provide access to the drywall saw. Insert the drywall saw into the drilled hole and cut along the small circle you just drew. Sand the hole edges smooth.

When choosing a ceiling type, it's important to consider your room dimensions, budget, desired aesthetic, ease of installation, lighting needs, and access needs. Ultimately, the best ceiling type will depend on your specific preferences and requirements. Consult with a professional to help guide your decision.

For a cohesive look, match the wall trim or ceiling color. Contrasting colors can make the medallion pop as an accent.

The size of a ceiling medallion will also depend on what type of room will be installed in. A dining room, bedroom, or a large entry way may have a medallion that's larger in diameter than the light fixture. But for a bathroom or a small hallway, choose one that's smaller than the circumference of the light fixture.

The hole in the medallion should be greater than the diameter of the ceiling box (typically, 3-12 or 4 inches) but less than the diameter of the light canopy.

Adhesive. You can use any adhesive that is rated for use with polyurethane (check the back of the label) -- we have had great success using Red Devil Construction Adhesive, LoctitePowergrab and PL Premium Polyurethane Adhesive, all of which work well and are readily available at most home improvement stores.

We were okay procrastinating the fixture switch, that is until we discovered the magic of the ceiling medallion: a beautiful, low-cost solution for moving a light fixture without the dreaded plaster patching! And I have to say, I LOVE the way the traditional ceiling medallion pairs with a more modern fixture.

One simple upgrade we recently made was to switch out our builder basic flush-mount light in our entryway with a pretty, schoolhouse-style semi-flush fixture, accented by a simple ceiling medallion. The light adds style and functionality to the space, and it is a relatively inexpensive project that most DIYers can do!

How can I make my ceiling fan more powerful? ›

Add a shrouded or duct to the fan. According to the article below, “a shrouded rotor can be 94% more efficient than an open rotor”. The gain depends on multiple factors, but there would almost always be a noticeable improvement in how much air is moved.

In the Dragonbarrow, you can find the abandoned Fort Faroth, south of the Minor Erdtree. Head inside to find all manor of bats and sirens. Either fight your way through or simply sneak/run to the ladder at the end to reach a ladder. Climb to the top to find a chest containing the right half of the Dectus Medallion.

“Ceiling medallions are classic! They were first seen in middle and upper class homes in the 19th century. Today it is very common to see ceiling medallions used in many applications.

Generally, pendant lights tend to hang from between 12-20″/ 30-51cm below a standard 8ft/ 2.4m ceiling, obviously also taking into account the above points. Another way to think about this is ensuring there's at least a 7ft/ 2.1m clearance between the floor and the bottom of your pendant.