Gemini-2 (2024)

This is how you enable NetBios over TCP/IP:

To enable NetBIOS over TCP/IP on Windows 7:

1. Click Start, and then click Network. (click Start, type ncpa.cpl into the search box for Windows 7 or Vista, hit ENTER).
2. Click on the Network and Sharing Center
3. Click Manage Network Connections.
4. Right click on the Local Area Connection select Properties.
5. Select Internet Protocol version 4 (TCP/IPv4)
6. Click the Advanced button under the General tab.
7. Click the WINS tab.
8. Click Enable NetBIOS Over TCP/IP.
9. Click OK and Exit the settings.

An alternet method of doing this is:

1. On the windows Task bar (normally at the bottom of the screen click on the network icon (looks like a small computer)
2. The click the Open Network and sharing center.
3. Then click on Change adapter setting on the Left panel.
4. Right click on the network adapter you want to use to connect to the Gemini-2 with. Desktops normally only have one choice, which is the hardware Ethernet port, while laptops will normally have two. One is the hardware Ethernet port and the other the Wireless network adapter. Right mouse click on the one that you intend to use to connect to the Gemini-2, and select properties.
5. Right mouse click on Internet Protocol Version 4 (TCP/IPv4) and select Properties.
6. Select Advanced...
7. Select the WINS tab
8. Under NetBIOS setting at the bottom, either select Default or Enable NetBIOS over TCP/IP. Normally Default should work fine.
9. Close all menus - You should now be able to usehttp://gemini for web browsers andftp://admin@gemini for the Windows File explorer.