I'm trying to put some rocks at the back and make it look like it's floating and ik this magnet rusts or degrades not really sure but I don't really know an alternative where I have the leisure of moving it.
Saw this and just wanna ask around if anyone has used it and how did you do so. https://a.co/d/eAnPetw
- Joined
- Apr 26, 2020
- Messages
- 650
- Reaction score
- 1,237
When introducing neodymium magnets to a saltwater environment, it's critical to take precautions to prevent corrosion. The salt and moisture in this environment can rapidly degrade the magnet's performance, potentially leaching harmful elements into the tank and harming the fish.
Here are a few steps to help protect your neodymium disc magnets:
Epoxy Resin: Coat the magnet in a thick layer of marine-grade epoxy resin. This waterproof material forms a solid barrier between the magnet and the saltwater, helping to prevent corrosion. Make sure that the epoxy resin is fully cured before introducing it to the tank.
Heat Shrink Tubing: After the epoxy resin has cured, you might also consider using heat shrink tubing for an added layer of protection. This tubing can be heated to shrink tightly around the magnet, offering additional resistance to the water.
Silicone Sealant: A silicone sealant can also be used to encase the magnet. Silicone is well-known for its waterproof properties and can be a good option for this type of application. The silicone should be completely dry and cured before the magnet is placed in the saltwater tank.
PVC Encasing: You could consider encasing the magnet in a PVC pipe. This can be done by selecting a pipe with a diameter slightly larger than the magnet, inserting the magnet, and then sealing both ends with a PVC cap. Use PVC cement to ensure a watertight seal.
