c2500-ik8s-l.122-5.bin: name of image file to backup
192.168.1.200: IP address of remote TFTP server
c2500-ik8s-l.122-5.bin: name of image file to use on TFTP server
Select Enter commands in enable mode.
Select Save device output to file. Specify the log file name.
Select Overwrite existing capture file.
Select Answer yes to any confirmation prompts.
Select Stop on error.
As a seasoned IT professional with extensive expertise in networking and device management, I've not only delved into the intricacies of Cisco IOS devices but have also implemented robust solutions for device configuration and management. Over the years, I've successfully employed tools like Kiwi CatTools to streamline operations and enhance efficiency in network administration.
In the provided example, the focus is on utilizing the "Device.CLI.Send commands" activity within Kiwi CatTools to perform a crucial task—backing up a Cisco IOS device image to a TFTP server. Let's break down the key concepts and commands used in this scenario:
This is a feature within Kiwi CatTools that allows users to send specific commands directly to network devices, facilitating automated configuration and management.
Backup Cisco IOS image:
A custom name and description are assigned to the activity for easy identification.
Options tab:
This is where users can configure various settings related to the activity.
List of commands to be entered on the device:
The following commands are specified to achieve the backup:
copy flash: tftp:c2500-ik8s-l.122-5.bin: Initiates the copy process from the device's flash memory to the TFTP server.
192.168.1.200: Specifies the IP address of the remote TFTP server.
c2500-ik8s-l.122-5.bin: Specifies the name of the image file to be backed up and used on the TFTP server.
Enter commands in enable mode:
This setting ensures that the commands are executed in the privileged EXEC mode, which is necessary for certain configuration changes.
Save device output to file:
This option allows capturing the output generated by the device during the execution of the commands.
Specify the log file name:
Users can define a name for the log file, providing a record of the activity.
Overwrite existing capture file:
This setting ensures that the log file is overwritten with new data during each execution.
Answer yes to any confirmation prompts:
This automated response is configured to handle confirmation prompts that may arise during the execution of commands.
Stop on error:
If any errors occur during the execution, the process will be halted, preventing further issues.
By leveraging these features and understanding the intricacies of the provided commands, network administrators can efficiently automate the backup process of Cisco IOS device images, ensuring data integrity and streamlined management.
IOS configurations are usually copied to a TFTP server using the copy command. You can backup both the startup configuration and the running configuration of your device. The copy command accepts two parameters: the first parameter is the from location, and the second it the to location.
Tftp copy running-config the filename tftp-ip-addr - Use this command to upload a duplicate of the Layer 2 or Layer 3 switch's running configuration file to a TFTP server. To copy the startup configuration file to a network server, use the copy nvram:startup-config ftp: | rcp: | tftp: command.
A TFTP (Trivial File Transfer Protocol) server is a simple file transfer protocol commonly used in networking. It serves as a communication platform for transferring files between client devices and the server.
First, make sure that the router is connected to a TFTP Server, also a valid ISO file is there. During boot-up, press Ctrl+Break continuously so that the router goes into ROMMON mode. Type the following command: rommon 1 > IP_ADDRESS=172.16.
If you need more than speed for transferring your business-critical files, the security, automation, and full-featured solution provided by GoAnywhere MFT can deliver.
The tftp command attempts to write the data to the specified file. However, if the remote TFTP server does not have the appropriate privileges to write the remote file or if the file does not already exist, the transfer is unsuccessful. This can be overridden using the tftpd daemon.
You can use the Cisco command-line interface (CLI) to back up the Cisco IOS image on a router to a remote server or a TFTP server. The process involves copying the image from the router's flash memory to the remote server or TFTP server, and then storing the image in a safe location.
Obtaining the configuration file from the TFTP server
The configuration file of a device is named hostname. cfg, where hostname is the host name of the device. For example, if the host name of a device is aaa, the configuration file of the device is named aaa. cfg.
The default configuration file is named device. cfg.
IOS software images and other files are typically stored in embedded flash memory in Cisco equipment (e.g., backup configuration files). In NVRAM, the startup configuration is kept. IOS file system (IFS) is a file system that is built for each memory device that is accessible on the device.
Introduction: My name is Jeremiah Abshire, I am a outstanding, kind, clever, hilarious, curious, hilarious, outstanding person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
