How To Calculate Cleaning Chemical Dilution Rates (2024)

Let's jump right into a dilution example...

OK, so the label says 32:1 but how much water and how much cleaning chemical concentrate do you put in the bottle, bucket or cleaning machine tank?

It’s important to get this right so let’s talk about a quick and easy way to calculate how much chemical you will need for any dilution rate.

Concentrated cleaning productswill save you lots of money provided you know how to safely and accurately mix them with water.

Time to get started...

The dilution rate is usually indicated as a ratio of chemical to water, for example 1:32. In this example it means the ideal dilution ratio of the product is 1 part chemical concentrate to 32 parts water…

Here's how you can work out exactly how much you will need in your sized bottle, bucket or tank?

Step 1. How much ready to use solution do you need?

Are you filling a bottle or a bucket or a tank?

Do you need 750ml? 6 litres? 50 litres?

Let’s take an example of a bucket...It’s an 11 litre bucket but you only want to fill it to just over half way, so let’s say we need 6 litres in total of cleaning solution. That’s the ready to use solution you need.

Step 2. What is the recommended chemical concentrate dilution rate?

Select the dilution rate that is appropriate for your task. You can look on the label or for more details check out the product’s training information guide for more details.

Let’s continue with the example of the bucket that holds 6 litres of ready to use solution.

Now, if the chemical dilution rate you have selected is 1:32 (this may sometimes be written as 32:1) how much water first needs to be added to the bucket and then how much chemical concentrate will you need?

Step 3. Let’s calculate exactly how much water and chemical you will need.

Here is where the rubber meets the road and a little bit of simple maths is required.

Let’s continue with the example of the 11 litre bucket which you want to fill with 6 litres of ready to use cleaning solution.

Here goes…

a. Total amount of 'Ready to Use' or RTU cleaning chemical solution required is...

6 litres or 6000ml

b. Recommended dilution rate is...

1:32 or 32:1. That’s 33 parts… 1 part of chemical and 32 parts of water. It’s important that you always add the 2 dilution ratio numbers together for the calculation below!

c. Ready for some magical cleaning chemical dilution maths?

Divide the total amount of solution required (1. 6L or 6000ml) by... the total number of dilution ratio parts (33) and that will equal how much cleaning chemical you need in your bucket.

d. The maths looks like this....

6L or 6000ml / (divided by) 33 parts = (equals) 0.182L or 182ml of cleaning chemical concentrate.

The final answer...

You will need 182ml of cleaning chemical concentrate in a bucket that you want 6L of solution in.

So that’s 5.818L / 5818ml of water and 182ml of cleaning chemical.

Easy isn’t it?

It will take some practice, most mobile phones these days have a calculator that will make your calculation even easier.