How to Diagnose a Computer Problem: 10 Steps (with Pictures) (2024)

1. Watch for boot errors, and search the web for any that pop up.
2. If it's running slow, use Task Manager to identify problem apps.
3. Use Device Manager to check for hardware errors and update drivers.
4. Listen for constantly-running fans, grinding sounds, or other strange noises.
5. Run an antivirus scan to check for malware.

Download Article

1. 1

   Check that the cables and components are properly connected. This is especially important if you recently upgraded your computer. Open your computer and make sure that all the cables, RAM chips, the video card, sound card, network card, and other components are all securely attached to the motherboard.^[1]

2. 2

   Check the POST. POST stands for "Power On Self Test". This is part of a computer's startup program that is used to diagnose the keyboard, random access memory (RAM), disk drives and other hardware to make sure they are working properly. If the POST detects any errors in the hardware, it will either display a text error message on the screen or a series of short and long beeps.

   • If an error message appears as you boot your computer, type the exact error message into a Google search to find more information about the error. Use your mobile phone or another computer, if needed. If you hear a series of beeps as your computer starts up, make a note of the pattern and visit https://www.computerhope.com/beep.htm to see what error the pattern indicates.^[2]

   Advertisem*nt

3. 3

   Check the load time of the operating system. The time it takes for an operating system to load when a computer boots up greatly depends on the hardware of the computer is running. If you notice your operating system takes significantly longer to load than it used to, this may indicate a problem with your hard drive that is preventing your computer from retrieving information from your hard drive.

4. 4

   Check for any graphics problems. If your computer is able to boot properly, but you notice graphics problems, this may indicate driver failures or hardware failures with graphics cards. If you suspect there might be a problem with your graphics card, you should first update your graphics card drivers. If the problem still persists, you can download software to test your graphics card.

5. 5

   See Also

   Solving The Most Common Computer Problems | EIRE SystemsHow to master problem identification | RenaissanceHardware or Software? How to Tell What’s Wrong with Your Device - ComputerCareA Seven-Step Approach to Solving Programming Problems

   Check for hardware problems. Many computer problems are caused by hardware failures or problems with hardware drivers. Windows will usually notify you about devices that have a problem. You can also use Device Manager to check the status of different hardware devices. Double-click a category in the Device Manager to display all devices in that category. Then double-click a specific device. Any errors with the device will be displayed in the "Device Status" box under the "General" tab. Check all devices. Use the following steps to open the Device Manager:

   • Click the Windows Start menu in the lower-left corner.
   • Type Control Panel.
   • Double-click the Control Panel in the Windows Start menu.
   • Click Hardware and Sound.
   • Click Device Manager below "Devices and Printers".
6. 6

   Check any newly installed software. Some software may require more resources than the system can provide. Chances are that if a problem begins after software starts, the software is causing it. If the problem appears directly upon startup, it may be caused by software that starts automatically on boot. Uninstall any recently installed programs and see if the problem continues. You may also want to limit the number of startup programs.

7. 7

   Check the RAM and CPU consumption. If your computer is choppy or running slow, it is good practice to see if a program is consuming more resources than the computer can provide. An easy way to check this is to use the Task Manager, right-click on the taskbar at the bottom of the screen and click Task Manager. Click the Processes tab. Click CPU to display a graph of the current CPU usage. Click Memory to see a graph of the RAM consumption.

   • If your computer CPU graph is running at 80%-100% most of the time, you may be able to upgrade your computer processor.
   • If your computer is using too much memory, close all unneeded programs and browser tabs and see if your computer's performance improves. Limit the amount of multi-tasking you do on your computer. If your computer doesn't have enough memory to do basic operations, some computers allow you to purchase and install more RAM.
8. 8

   Listen to the computer. If the hard drive is scratching or making loud noises, shut off the computer and have a professional diagnose the hard drive. Also, listen to the CPU fan. If the fan is blowing hard, this could mean that your CPU is getting too hot because it is working too hard.

   • If you suspect you have a damaged hard drive, be sure to backup all important data from the drive immediately and shutdown your computer. Each time you boot up a computer with a damaged hard drive, it will damage the hard drive further. If you are unable to backup your data, remove your hard drive and take it to a professional for data recovery.
9. 9

   Run a virus and malware scan. Performance problems can be caused by malware on the computer. Running a virus scan can unearth any problems. Use a trusted antivirus program that is frequently updated, such as Norton, McAfee, or Malwarebytes.^[3]

10. 10

    Check for the problem in safe mode. As a last-ditch effort, check the problem in safe mode. If the problem persists in safe mode, it is a fair bet that the operating system itself is to blame. You may need to Reinstall Windows.

Advertisem*nt

How do I find out what's wrong with my PC?

Use Windows troubleshooters to identify hardware and software problems. In Windows 10, go to Settings > Update & Security > Troubleshoot > Additional troubleshooters.^[4] On Windows 11, go to Settings > System > Troubleshoot > Other troubleshooters.

How do I test a PC for failing hardware?

Test RAM by pressing Windows key + R, typing mdsched, and pressing Enter. To test a hard drive or SSD, use a free tool like CrystalDiskInfo. For a free all-in-one hardware tester, try HWinfo.

Will I lose everything if I reset my PC?

When you reset a Windows PC, you'll be given two reset options: Keep personal files and Remove everything. Selecting Keep personal files ensures your files and documents won't be deleted.

Why does my laptop keep whirring?

Dust and debris (like pet hair) may have accumulated in the vents, making the fans work harder. Your fan will also run more often if your laptop is overheating due to resource-intensive software or operating in extreme temperatures.

• If you do not feel comfortable diagnosing or repairing a computer problem, it is best to take the computer to a certified technician and have it repaired for a moderate fee.

  Thanks

  Helpful9Not Helpful8

• These procedures will begin to narrow down common problems, but to find a specific problem, tools or specialized techniques may need to be used.

  Thanks

  Helpful5Not Helpful4

• Always consult a competent computer technician, whether you are going to do the troubleshooting on your own or under supervision.

  Thanks

  Helpful2Not Helpful0

• Do not attempt to repair problems unless you are sure you know what you are doing

  Thanks

  Helpful1Not Helpful0

You Might Also Like

Co-authors: 30

Updated: May 1, 2024

Views:762,587

Categories: Computer Troubleshooting

Spanish

German

Portuguese

Russian

Italian

Indonesian

French

Arabic

Dutch

Chinese

Vietnamese

Hindi

Korean

Thai

Turkish

Japanese