Download Article
Reviewed byJoseph Meyer
Last Updated: March 16, 2024Fact Checked
Download Article
- With Exponents |
- Slot Value |
- Video |
- |
- Tips
Trying to read a string of binary 1's and 0's can seem a daunting task. However, with a bit of logic we can figure out what they mean. Humans have adapted to use a base ten number system simply because we have ten fingers. Computers, on the other hand (no pun intended), have only two "fingers"--on and off or one and zero. Therefore, the base two number system has been created.[1]
Method 1
Method 1 of 2:
With Exponents
Download Article
1
Find a binary number you want to convert. We'll use this as an example: 101010.
2
Multiply each binary digit by two to the power of its place number. Remember, binary is read from right to left.[2] The rightmost place number being zero.
Advertisem*nt
3
Add all the results together. Let's go from right to left.[3]
- 0 × 20 = 0
- 1 × 21 = 2
- 0 × 22 = 0
- 1 × 23 = 8
- 0 × 24 = 0
- 1 × 25 = 32
- Total = 42
4
Try another example. Let's use 101. Here is the same method as above, but in a slightly different format. You may find this format easier to understand.[4]
- 101= (1X2) power of 2 + (0X2) power of 1 + (1X2) power 0
- 101= (2X2) + (0X0) + (1)
- 101= 4 + 0 + 1
- 101= 5
- The 'zero' is not a number, but its place value must be noted.
Advertisem*nt
Method 2
Method 2 of 2:
Slot Value
Download Article
1
Find your number. The example we'll use is 00101010.
See Also4.8. Converting Decimal Numbers to Binary Numbers — Problem Solving with Algorithms and Data StructuresDecimal to Binary (Definition, Conversion, Table and Examples)Decimal to Binary Conversion, Steps with Solved Examples and FAQs[Solved] The binary number 10101 is equivalent to decimal number:2
Read from right to left. With each slot, the values are doubled. The first digit from the right has a value of 1, the second is a 2, then a 4, and so on.[5]
3
Add the values of the ones. The zeros are assigned their correlating number, but those numbers are not added.
- So, in this example, add 2, 8, and 32. The result is 42.
- There is a 'no' on 1, a 'yes' on 2, a 'no' on 4, a 'yes' on 8, a 'no' on 16, a 'yes' on 32, a 'no' on 64 and a 'no' on 128. "Yes" means to add, "no" is to skip. You can stop at the last one-digit.
- So, in this example, add 2, 8, and 32. The result is 42.
4
Translate the value into letters or punctuation marks.[6] In addition, you can convert numbers from binary to decimal or convert from decimal to binary.
- In punctuation marks, the 42 equals an asterisk (*).
Advertisem*nt
Community Q&A
Search
Question
How can I turn binary into a sentence?
Community Answer
You translate a string of binary code to decimals and then translate the decimals into html code. For example, 111011= 123, 123= { . Write multiple strings of binary code and you'll get a sentence.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 135Helpful 153
Question
Can I learn to read binary if I am frightened of math?
Community Answer
You will need some basic understanding of math (addition and multiplication) or a calculator.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 44Helpful 102
Question
How do I add two lines of binary numbers together?
Community Answer
It really depends on the method you're using. If you're looking for a sentence conversion, then the computer automatically reads in sets of eight e.g 00111111 (?), 00111101 (=), 01000001 (A) etc. However, the process the computer goes through is much more complicated than that. Essentially, every five digits is equal to either a symbol, number, or letter.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 42Helpful 65
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisem*nt
Video
Tips
The numbers we deal with today have a place value. Assuming we are working with whole numbers, the right-most digit is the one's place, the next right-most digit is the ten's place, then hundred's, and so on. The place value for binary numbers go from one's, two's, four's, eight's, and so on.[7]
Thanks
Helpful1Not Helpful0
Binary counts just like normal numbers. The rightmost digit increments by one until it cannot increase any more (in this case from 0 to 1) and then increments the next digit to the left by one and starts again at zero.
Thanks
Helpful1Not Helpful1
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!
Advertisem*nt
You Might Also Like
Advertisem*nt
References
- ↑ https://www.cut-the-knot.org/do_you_know/BinaryHistory.shtml
- ↑ https://www.computerhope.com/jargon/b/binary.htm
- ↑ https://www.sciencefocus.com/science/how-to-read-binary/
- ↑ https://www.scienceabc.com/innovation/how-to-read-binary.html
- ↑ https://www.allinallnews.com/physics/how-to-read-binary-codes
- ↑ https://www.rapidtables.com/convert/number/binary-to-ascii.html
- ↑ https://www.basic-mathematics.com/binary-number-system.html
About This Article
Reviewed by:
Joseph Meyer
Math Teacher
This article was reviewed by Joseph Meyer. Joseph Meyer is a High School Math Teacher based in Pittsburgh, Pennsylvania. He is an educator at City Charter High School, where he has been teaching for over 7 years. Joseph is also the founder of Sandbox Math, an online learning community dedicated to helping students succeed in Algebra. His site is set apart by its focus on fostering genuine comprehension through step-by-step understanding (instead of just getting the correct final answer), enabling learners to identify and overcome misunderstandings and confidently take on any test they face. He received his MA in Physics from Case Western Reserve University and his BA in Physics from Baldwin Wallace University. This article has been viewed 1,073,651 times.
167 votes - 70%
Co-authors: 53
Updated: March 16, 2024
Views:1,073,651
Categories: Featured Articles | Mathematics
Article SummaryX
To read binary, find a number that you want to read, and remember to count the places from right to left. Then, multiply each digit by 2 to the power of its place number. For example, if the 3rd place from the right is a 1, you would multiply 1 by 2 to the power of 3 to get 8. Once you have an answer for each place, add the numbers together from right to left. For example, 101 would translate to the number 9. For tips on using other techniques, like exponents or slot value, read on!
Did this summary help you?
In other languages
French
Spanish
German
Portuguese
Russian
Indonesian
Dutch
Chinese
Thai
Arabic
Korean
Hindi
Turkish
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 1,073,651 times.
Reader Success Stories
Thomas Palkowski
Apr 25, 2018
"Back when I was in college, I had a math teacher that had a very simple way of reading binary. I have not used it..." more
More reader storiesHide reader stories
Did this article help you?
Advertisem*nt