L5 S1 Fusion Surgery (2024)

Indications, Complications, & Alternative Treatments

Am I a Candidate?

Your low back pain is crippling and has failed to respond to conservative treatments. Your doctor recommended an L5 S1 surgery. What is L5 S1 Fusion? What are the indications for L5 S1 Fusion? Is L5/S1 fusion major surgery? What is the success rate of fusion surgery? What are the complications? Are there regenerative alternative treatments? Let’s dig in.

What is L5 S1 Fusion Surgery?

Spinal fusion is a major surgery where one or more spinal bones (vertebrae) are fused together using screws, bolts, and or plates. The hardware may be placed in the front (anterior) or the back (posterior) of the spine. The disc between the spinal bones is often times removed and replaced with bone or a spacer. L5 S1 Fusion refers to the level of the surgery.

L5 S1 Fusion Surgery (2)

There are 5 spinal bones in the low back which are numbered from top to bottom L1, L2, L3, L4, and L5. Sandwiched between each of the spinal bones is a disc. The disc is named for the two spinal bones it is sandwiched between. For example, the lowest disc in the low back is the L5/S1 disc. The L5/S1 disc is sandwiched between the L5 and S1 spinal bones. Therefore, L5 S1 fusion surgery involves the surgical removal of the L5/S1 disc and fusing the L5 and S1 spinal bones together. Different surgical techniques and approaches exist. PLIF, posterior lumbar interbody fusion is a case in point that has been reviewed in detail in a prior blog.

What Are the Indications for L5 S1 Fusion?

Lumbar fusion is a popular surgery. Between 1998 and 2008, the yearly number of lumbar fusion surgeries performed in the United States increased from 77,682 to 210,407 (1). Lumbar fusion can be used to treat a number of painful and degenerative conditions in the low back. The most common indications for L5 S1 fusion include: Low back disc degeneration Slipped disc (spondylolisthesis) Spinal Bone Fracture Recurrent Disc Herniation Pain radiating down leg (Sciatica ) Curvature (Scoliosis) Narrowing of the Canal (Stenosis) Failed Spine Surgery with Instability.

Is a Spine Fusion Major Surgery?

Absolutely! The surgery involves cutting through important muscles, ligaments, and tendons to access the targeted disc. The disc is then removed and the area is packed with bone and often times a spacer. To stabilize the spine, screws are placed into the spinal bones above and then below the disc that is removed. The screws are stabilized by additional hardware including plates and rods.

What Is the Success Rate of Spinal Fusion Surgery?

Success, as it relates to spinal fusion surgery, is difficult to judge. Why? Because there are a significant number of variables involved including the specific surgical approach, preoperative MRI, and x-ray finding, the results from pressuring the disc, patient’s age, medical history, and the parameters studied. Consider the following results: In one study 53 patients were followed for an average of 20 months after fusion surgery. In those patients with normal MRIs prior to surgery, only 50 % were improved after surgery. (2) 2 years after lumbar fusion 40% of patients were unsure/dissatisfied with the outcomes reporting ongoing back pain and limited daily function (3) Another study demonstrated that the overall failure rate of lumbar spine surgery was estimated to be 10%–46% (4). So, l5 s1 surgery success rates would reflect in those statistics.

Can Screws Come Loose After Spinal Fusion?

Yes! There are a number of complications arising from L5 S1 fusion. The most common include failed fusion where the bones do not properly fuse. Why would this occur? Learn more about the long-term effects of spinal fusion here.

Non-Union

Non-union occurs when the spinal bones that are bolted together fail to fuse or grow together. Rates vary depending upon the specific type of lumbar spinal fusion procedure. For procedures that require more bone, like a posterior fusion, the non-union rates are as high as 26-36% (5,6,).

Hardware Breaking

L5 S1 Fusion Surgery (3)

Broken Screws in Lumbar Fusion

Lumbar fusion involves screws, bolts, and plates that stabilize the spinal bones. There are significant forces placed on the low back and the hardware. Regrettably, as a result of these forces, the hardware can break creating spinal instability and pain. The incidence of hardware failure in one study was an alarming 36% (7). Treatment of hardware failure often requires additional surgery to remove the broken hardware and replace it.

Hardware Becomes Loose

Screws are used in lumbar fusion to stabilize the spine. The same forces that can cause the hardware to break can also cause the screws to become loose. This, in turn, can create spinal instability and pain. Collectively about 1 in 10 patients who have a low back fusion will need a second surgery to fix non-union or hardware failure (8).

Additional Complications from L5 S1 Lumbar Fusion

There are a number of problems that arise as a direct result of lumbar fusion itself. The two that you most need to know about are Adjacent Segment Disease and Spinal Muscle Injury.

Adjacent Segment Disease

The disc is an important shock absorber. Fusion surgery removes this important shock absorber placing additional stress and forces on the discs and facet joints above and below the level of the fusion. This additional force in turn can lead to injury of these facet joints and discs leading to degeneration and arthritis. This is a real problem, with an incidence of 9% (9). This can lead to additional surgeries including fusions. To learn more about this tragic complication please click on the video below.

Spinal Muscle Injury

The spinal muscles provide critical stability and support for the spine. Unfortunately, lumbar fusion significantly compromises the health and integrity of these muscles. This is in turn can lead to spine instability and additional injuries including degeneration and arthritis. VA is a recent patient seen in the clinic who experienced this complication. VA underwent lumbar fusion several years ago for severe low back pain. Unfortunately, after the surgery, the pain never changed. His low back MRI is below and is most significant for the death of the critical low back muscles. The MRI is a cross-section image. On the right, the yellow arrows point to dark healthy spine muscles that were present prior to the surgery. The image on the left is after the surgery. The yellow arrows point to the muscles that were injured and now are dead as a result of the fusion surgery.

Is There an Alternative to L5 S1 Fusion Surgery? What Non Surgical Options Exist?

Absolutely. At theCenteno-Schultz Clinic, we believe in a comprehensive approach to the treatment of spinal pain. We view and approach the spine as aFunctional Spinal Unit.This functional unit includes discs, facet joints, ligaments, fascia, and muscles. These structures work with one another in a highly specialized and dependent manner. Therefore for the very best results, the spine and all its parts need to be evaluated and treated together. This novel, comprehensive approach can help you avoid lumbar fusion and its complications. Treatment options include PRP and your own bone marrow-derived stem cells. PRP is rich in growth factors that can increase blood flow and healing. To better understand how to avoid lumbar fusions by using precisely guided PRP and stem cell injections please click on the video below.

Related: L 4/5 Fusion: A Better Understanding

In Conclusion: Lumbar Spinal Fusion Is Not the Only Option Your Back Pain

L5 S1 fusion is major surgery whereby the L5/S1 disc is removed and the L5 and S1 spinal bones are stabilized by hardware. Indications for L5 S1 fusion are debilitating pain and dysfunction arising from degenerative disc disease, slipped disc, fractures, recurrent herniation, sciatica, scoliosis, and spinal canal narrowing. Success rates vary depending upon the parameters examined. Patient satisfaction is low. Complications include failed fusion due to non-union, hardware breaking, and hardware becoming loose. Adjacent Segment Disease and injury of spinal muscles are additional complications from fusion surgery. These complications can be avoided by avoiding fusion surgery in the first place.

Consider the Perc-FSU Procedure

The functional spinal unit is the comprehensive approach utilized at The Centeno-Schultz Clinic, in Broomfield, Colorado – right between Boulder and Denver. It views the spine and all its moving parts as a whole. Treatment options for back pain include PRP and a patient’s own bone marrow-derived stem cells. Don’t let your low back pain limit your future. Schedule a Telemedicine consultation with a board-certified, fellowship-trained physician who can discuss your regenerative options. PRP and stem cell treatment options can accelerate your healing and do not have the complications or significant downtime associated with L5 S1 fusion surgery.\

References

1. Rajaee SS, Bae HW, Kanim LE, Delamarter RB. Spinal fusion in the United States: analysis of trends from 1998 to 2008. Spine (Phila Pa 1976) 2012;37:67–76.

2..Gill K, Blumenthal SL. Functional results after anterior lumbar fusion at L5-S1 in patients with normal and abnormal MRI scans. Spine. 1992;17(8):940-2.

3.Greenwood J, McGregor A, Jones F, Hurley M. Evaluating rehabilitation following lumbar fusion surgery (REFS): study protocol for a randomised controlled trial. Trials. 2015;16:251.

4. Thomson S. Failed back surgery syndrome: definition, epidemiology and demographics. Br J Pain. 2013;7:56–59.

5.Tsutsumimoto T, Shimogata M, Yoshimura Y, Misawa H. Union versus nonunion after posterolateral lumbar fusion: a comparison of long-term surgical outcomes in patients with degenerative lumbar spondylolisthesis. Eur Spine J. 2008;17(8):1107–1112. doi: 10.1007/s00586-008-0695-9.

6.Herkowitz HN, Kurz LT. Degenerative lumbar spondylolisthesis with spinal stenosis. A prospective study comparing decompression with decompression and intertransverse process arthrodesis. J Bone Joint Surg Am. 1991 Jul; 73(6):802-8. https://www.ncbi.nlm.nih.gov/pubmed/2071615/

7.Harris IA, Traeger A, Stanford R, Maher CG, Buchbinder R. Lumbar spine fusion: what is the evidence. Intern Med J. 2018;48(12):1430-4.

8.Greiner-Perth R, Boehm H, Allam Y, Elsaghir H, Franke J. Reoperation rate after instrumented posterior lumbar interbody fusion: a report on 1680 cases. Spine (Phila Pa 1976). 2004 Nov 15;29(22):2516-20. 9..Okuda S, Yamash*ta T, Matsumoto T, et al. Adjacent Segment Disease After Posterior Lumbar Interbody Fusion: A Case Series of 1000 Patients. Global Spine J. 2018;8(7):722-7.

Am I a Candidate?

To answer this question, fill out the candidate form below to request a new patient evaluation, and a patient advocate will reach out to you to determine your next steps. Your one-hour, in-office or telemedicine evaluation will be with one of the world’s experts in the field of Interventional Orthopedics.

L5 S1 Fusion Surgery (2024)

FAQs

How long does it take to recover from L5-S1 fusion surgery? ›

You may have trouble sitting or standing in one position for very long. It may take 4 to 6 weeks to get back to doing simple activities, such as light housework. It may take 6 months to a year for your back to get better completely.

What is the success rate of L5-S1 fusion? ›

There was an overall 80% fusion rate for all patients who underwent anterior lumbar fusion at L5-S1. Average age was 34 years, with average length of disability from low-back pain of 11 months.

How painful is L5-S1 fusion? ›

Spinal fusion surgery itself isn't painful, and anesthesia is a key part of managing pain during the procedure. But recovery from spinal fusion surgery can be painful. Your surgeon and other healthcare providers will work with you to manage your pain, but some amount of pain is common and expected as you recover.

What are the problems after L5-S1 fusion? ›

Complications include failed fusion due to non-union, hardware breaking, and hardware becoming loose. Adjacent Segment Disease and injury of spinal muscles are additional complications from fusion surgery. These complications can be avoided by avoiding fusion surgery in the first place.

What can you never do again after spinal fusion? ›

You probably should not perform powerlifting exercises after spinal fusion or any activity that puts extreme stresses on the spine. You may be restricted from certain physical labor jobs such as heavy lifting, repetitive lifting, twisting, or lower back bending.

What is the downside of spinal fusion? ›

Spinal fusions incorporate the use of rods, screws or plates to prevent motion in the hopes of providing stability and reduce pain. However, spinal fusions will place extra stress on the disc above or below a fusion. This stress can cause disc herniations and the wearing out of joints.

How long do you wear a back brace after a L5-S1 Fusion? ›

You will wear the brace after surgery until your spine has healed or fused, a period that can range from 4 weeks to 6 months.

Can I sleep on my side after L5-S1 Fusion? ›

The best position to sleep in after spine surgery is lying flat on your back, placing a pillow below your knees or lying sideways with a pillow between your bent knees. If you find lying on your side the most relaxing, make sure both legs are one above the other with your knees bent.

Can you bend after L5-S1 fusion? ›

Avoid Bending, Lifting, and Twisting

If you absolutely have to, be sure to lift by bending your knees, not your back. It follows that you should try to avoid bending, lifting, and twisting with your back muscles at all for the first few weeks after surgery (consult with your surgeon to determine an exact timeline).

How long are you bedridden after spinal fusion? ›

You don't need to fear being bed-ridden for weeks after spinal surgery, since it's of the utmost importance to your post-surgical recovery to get up very soon. Movement is critical to proper healing after spinal surgery, so you can expect to get out of bed the same day or the very next day after surgery.

How many years does a spinal fusion last? ›

How Many Years Does a Spinal Fusion Last? Spinal fusion is intended to last for life, as the results are permanent. Many spinal fusion patients experience improved pain and mobility for many years after the surgery.

Can I take care of myself after spinal fusion surgery? ›

Sit for only 20-30 minutes at a time to avoid spinal compression. For the first two weeks after surgery, only take short walks; slowly increase the amount of walking and not overdue it. Some patients will wear a back brace when walking or sitting; the physician determines how long the brace is necessary.

What are the odds of being paralyzed after spinal fusion? ›

The Chances Are Low, But Not Nonexistent

Generally, the risk of paralysis is considered to be less than 1% for most spine surgeries.

How long does L5-S1 fusion surgery take? ›

For people having an L5/S1 ALIF with anatomy that allows for easy access to the front of the spine, the procedure can take one to two hours from start to finish. For patients with prior surgeries, spinal deformities, or anatomy that makes it difficult to access the spine, the surgery can take much longer.

Can you feel the screws after spinal fusion? ›

If the hardware is prominent under the skin the patient may feel a painful bump,” Dr. Lieberman explains. “If the hardware loosens or is irritating the surrounding tissue and nerves, the patient may feel pain or may feel and hear crepitus—a crackling sound or popping sound.”

How long do you wear a back brace after a l5 s1 Fusion? ›

You will wear the brace after surgery until your spine has healed or fused, a period that can range from 4 weeks to 6 months.

What are the restrictions after L5 S1 fusion? ›

Things You Can Never Do After Spinal Fusion

However, you should avoid powerlifting exercises or any activities that put extreme stress on your spine. You must also limit certain physical jobs that involve heavy lifting, repetitive lifting, twisting, or bending your lower back.

What happens if you accidentally bend after spinal fusion? ›

Putting undue stress on a bone that needs healing often exacerbates an injury. Apply that same concept to recovery from spinal surgeries. Avoid bending at all after a lumbar fusion if possible, as bending or twisting can interfere with the way the fusion heals and even damage the work that was done.

Can I sleep on my side after l5 s1 Fusion? ›

The best position to sleep in after spine surgery is lying flat on your back, placing a pillow below your knees or lying sideways with a pillow between your bent knees. If you find lying on your side the most relaxing, make sure both legs are one above the other with your knees bent.

Top Articles
How to Invest in UCITS Funds
The Curious Case of Seer in Apex Legends: A User Perspective
Hotels
Www.fresno.courts.ca.gov
Stretchmark Camouflage Highland Park
Dollywood's Smoky Mountain Christmas - Pigeon Forge, TN
Mate Me If You May Sapir Englard Pdf
Craigslist Mpls Mn Apartments
Mileage To Walmart
Rainbird Wiring Diagram
Jennette Mccurdy And Joe Tmz Photos
Holly Ranch Aussie Farm
Merlot Aero Crew Portal
What's Wrong with the Chevrolet Tahoe?
Imbigswoo
Craigslist Free Grand Rapids
Missing 2023 Showtimes Near Landmark Cinemas Peoria
2016 Hyundai Sonata Refrigerant Capacity
使用 RHEL 8 时的注意事项 | Red Hat Product Documentation
Drago Funeral Home & Cremation Services Obituaries
Aaa Saugus Ma Appointment
Keci News
Hellraiser 3 Parents Guide
Renfield Showtimes Near Paragon Theaters - Coral Square
Craigslist Hunting Land For Lease In Ga
Farm Equipment Innovations
Stockton (California) – Travel guide at Wikivoyage
Emuaid Max First Aid Ointment 2 Ounce Fake Review Analysis
Stubhub Elton John Dodger Stadium
Chicago Pd Rotten Tomatoes
Craigslist Central Il
Lehpiht Shop
Shnvme Com
Gas Prices In Henderson Kentucky
Wednesday Morning Gifs
10 Most Ridiculously Expensive Haircuts Of All Time in 2024 - Financesonline.com
Honda Ruckus Fuse Box Diagram
Finland’s Satanic Warmaster’s Werwolf Discusses His Projects
Wayne State Academica Login
Uvalde Topic
2023 Fantasy Football Draft Guide: Rankings, cheat sheets and analysis
Bob And Jeff's Monticello Fl
Beaufort SC Mugshots
Dinar Detectives Cracking the Code of the Iraqi Dinar Market
Mudfin Village Wow
Grizzly Expiration Date Chart 2023
Mychart University Of Iowa Hospital
Blue Beetle Showtimes Near Regal Evergreen Parkway & Rpx
Meet Robert Oppenheimer, the destroyer of worlds
Erica Mena Net Worth Forbes
Hcs Smartfind
Latest Posts
Article information

Author: Duncan Muller

Last Updated:

Views: 6132

Rating: 4.9 / 5 (79 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Duncan Muller

Birthday: 1997-01-13

Address: Apt. 505 914 Phillip Crossroad, O'Konborough, NV 62411

Phone: +8555305800947

Job: Construction Agent

Hobby: Shopping, Table tennis, Snowboarding, Rafting, Motor sports, Homebrewing, Taxidermy

Introduction: My name is Duncan Muller, I am a enchanting, good, gentle, modern, tasty, nice, elegant person who loves writing and wants to share my knowledge and understanding with you.