A volume is a detachable block storage device, similar to a USB harddrive. You can attach a volume to only one instance. Use the openstack
client commands to create and manage volumes.
Create a volume¶
This example creates a my-new-volume
volume based on an image.
List images, and note the ID of the image that you want to use for yourvolume:
$ openstack image list+--------------------------------------+---------------------------------+| ID | Name |+--------------------------------------+---------------------------------+| 8bf4dc2a-bf78-4dd1-aefa-f3347cf638c8 | cirros-0.3.5-x86_64-uec || 9ff9bb2e-3a1d-4d98-acb5-b1d3225aca6c | cirros-0.3.5-x86_64-uec-kernel || 4b227119-68a1-4b28-8505-f94c6ea4c6dc | cirros-0.3.5-x86_64-uec-ramdisk |+--------------------------------------+---------------------------------+
List the availability zones, and note the ID of the availability zone inwhich you want to create your volume:
$ openstack availability zone list --volume+-----------+-------------+| Zone Name | Zone Status |+-----------+-------------+| nova | available |+-----------+-------------+
Create a volume with 8 gibibytes (GiB) of space, and specify theavailability zone and image:
$ openstack volume create --image 8bf4dc2a-bf78-4dd1-aefa-f3347cf638c8 \ --size 8 --availability-zone nova my-new-volume+------------------------------+--------------------------------------+| Property | Value |+------------------------------+--------------------------------------+| attachments | [] || availability_zone | nova || bootable | false || consistencygroup_id | None || created_at | 2016-09-23T07:52:42.000000 || description | None || encrypted | False || id | bab4b0e0-ce3d-4d57-bf57-3c51319f5202 || metadata | {} || multiattach | False || name | my-new-volume || os-vol-tenant-attr:tenant_id | 3f670abbe9b34ca5b81db6e7b540b8d8 || replication_status | disabled || size | 8 || snapshot_id | None || source_volid | None || status | creating || updated_at | None || user_id | fe19e3a9f63f4a14bd4697789247bbc5 || volume_type | lvmdriver-1 |+------------------------------+--------------------------------------+
To verify that your volume was created successfully, list the availablevolumes:
$ openstack volume list+--------------------------------------+---------------+-----------+------+-------------+| ID | Name | Status | Size | Attached to |+--------------------------------------+---------------+-----------+------+-------------+| bab4b0e0-ce3d-4d57-bf57-3c51319f5202 | my-new-volume | available | 8 | |+--------------------------------------+---------------+-----------+------+-------------+
If your volume was created successfully, its status is
available
. Ifits status iserror
, you might have exceeded your quota.
Volume Types¶
Cinder supports these three ways to specify volume type
duringvolume creation.
volume_type
cinder_img_volume_type (via glance image metadata)
default volume type (via project defaults or cinder.conf)
volume-type¶
User can specify volume type when creating a volume.
$ openstack volume create --type <volume-type> ...
cinder_img_volume_type¶
If glance image has cinder_img_volume_type
property, Cinder uses thisparameter to specify volume type
when creating a volume.
Choose glance image which has cinder_img_volume_type
property and createa volume from the image.
$ openstack image list+--------------------------------------+---------------------------------+--------+| ID | Name | Status |+--------------------------------------+---------------------------------+--------+| 376bd633-c9c9-4c5d-a588-342f4f66d086 | cirros-0.3.5-x86_64-uec | active || 2c20fce7-2e68-45ee-ba8d-beba27a91ab5 | cirros-0.3.5-x86_64-uec-ramdisk | active || a5752de4-9faf-4c47-acbc-78a5efa7cc6e | cirros-0.3.5-x86_64-uec-kernel | active |+--------------------------------------+---------------------------------+--------+$ openstack image show 376bd633-c9c9-4c5d-a588-342f4f66d086+------------------------+------------------------------------------------------+| Field | Value |+------------------------+------------------------------------------------------+| checksum | eb9139e4942121f22bbc2afc0400b2a || cinder_img_volume_type | nfstype || container_format | ami || created_at | 2016-10-13T03:28:55Z || disk_format | ami || file | /v2/images/376bd633-c9c9-4c5d-a588-342f4f66d086/file || id | 376bd633-c9c9-4c5d-a588-342f4f66d086 || min_disk | 0 || min_ram | 0 || name | cirros-0.3.5-x86_64-uec || owner | 88ba456e3a884c318394737765e0ef4d || properties | kernel_id='a5752de4-9faf-4c47-acbc-78a5efa7cc6e', || | ramdisk_id='2c20fce7-2e68-45ee-ba8d-beba27a91ab5' || protected | False || schema | /v2/schemas/image || size | 25165824 || status | active || tags | || updated_at | 2016-10-13T03:28:55Z || virtual_size | None || visibility | public |+------------------------+------------------------------------------------------+$ openstack volume create --image 376bd633-c9c9-4c5d-a588-342f4f66d086 \ --size 1 --availability-zone nova test+---------------------+--------------------------------------+| Field | Value |+---------------------+--------------------------------------+| attachments | [] || availability_zone | nova || bootable | false || consistencygroup_id | None || created_at | 2016-10-13T06:29:53.688599 || description | None || encrypted | False || id | e6e6a72d-cda7-442c-830f-f306ea6a03d5 || multiattach | False || name | test || properties | || replication_status | disabled || size | 1 || snapshot_id | None || source_volid | None || status | creating || type | nfstype || updated_at | None || user_id | 33fdc37314914796883706b33e587d51 |+---------------------+--------------------------------------+
default volume type¶
If above parameters are not set, cinder uses default volume type duringvolume creation.
The effective default volume type (whether it be project default ordefault_volume_type) can be checked with the following command:
$ openstack volume type list --default
There are two ways to set the default volume type:
Project specific defaults
default_volume_type defined in cinder.conf
Project specific defaults (available since mv 3.62 or higher)¶
Project specific defaults can be managed using the Default Volume Types APIIt is set on a per project basis and has a higher priority overdefault_volume_type defined in cinder.conf
default_volume_type¶
If the project specific default is not set then default_volume_typeconfigured in cinder.conf is used to create volumes.
Example cinder.conf file configuration.
[default]default_volume_type = lvmdriver-1
Attach a volume to an instance¶
Attach your volume to a server, specifying the server ID and the volumeID:
$ openstack server add volume 84c6e57d-a6b1-44b6-81eb-fcb36afd31b5 \ 573e024d-5235-49ce-8332-be1576d323f8 --device /dev/vdb
Show information for your volume:
$ openstack volume show 573e024d-5235-49ce-8332-be1576d323f8
The output shows that the volume is attached to the server with ID
84c6e57d-a6b1-44b6-81eb-fcb36afd31b5
, is in the nova availabilityzone, and is bootable.+------------------------------+-----------------------------------------------+| Field | Value |+------------------------------+-----------------------------------------------+| attachments | [{u'device': u'/dev/vdb', || | u'server_id': u'84c6e57d-a || | u'id': u'573e024d-... || | u'volume_id': u'573e024d... || availability_zone | nova || bootable | true || consistencygroup_id | None || created_at | 2016-10-13T06:08:07.000000 || description | None || encrypted | False || id | 573e024d-5235-49ce-8332-be1576d323f8 || multiattach | False || name | my-new-volume || properties | || replication_status | disabled || size | 8 || snapshot_id | None || source_volid | None || status | in-use || type | lvmdriver-1 || updated_at | 2016-10-13T06:08:11.000000 || user_id | 33fdc37314914796883706b33e587d51 |+------------------------------+-----------------------------------------------+
Detach a volume from an instance¶
Detach your volume from a server, specifying the server ID and the volumeID:
$ openstack server remove volume 84c6e57d-a6b1-44b6-81eb-fcb36afd31b5 \ 573e024d-5235-49ce-8332-be1576d323f8
Show information for your volume:
$ openstack volume show 573e024d-5235-49ce-8332-be1576d323f8
The output shows that the volume is no longer attached to the server:
+------------------------------+-----------------------------------------------+| Field | Value |+------------------------------+-----------------------------------------------+| attachments | [] || availability_zone | nova || bootable | true || consistencygroup_id | None || created_at | 2016-10-13T06:08:07.000000 || description | None || encrypted | False || id | 573e024d-5235-49ce-8332-be1576d323f8 || multiattach | False || name | my-new-volume || properties | || replication_status | disabled || size | 8 || snapshot_id | None || source_volid | None || status | in-use || type | lvmdriver-1 || updated_at | 2016-10-13T06:08:11.000000 || user_id | 33fdc37314914796883706b33e587d51 |+------------------------------+-----------------------------------------------+
Delete a volume¶
To delete your volume, you must first detach it from the server.To detach the volume from your server and check for the list of existingvolumes, see steps 1 and 2 in Resize_a_volume.
Delete the volume using either the volume name or ID:
$ openstack volume delete my-new-volume
This command does not provide any output.
List the volumes again, and note that the status of your volume is
deleting
:$ openstack volume list+----------------+-----------------+-----------+------+-------------+| ID | Name | Status | Size | Attached to |+----------------+-----------------+-----------+------+-------------+| 573e024d-52... | my-new-volume | deleting | 8 | || bd7cf584-45... | my-bootable-vol | available | 8 | |+----------------+-----------------+-----------+------+-------------+
When the volume is fully deleted, it disappears from the list ofvolumes:
$ openstack volume list+----------------+-----------------+-----------+------+-------------+| ID | Name | Status | Size | Attached to |+----------------+-----------------+-----------+------+-------------+| bd7cf584-45... | my-bootable-vol | available | 8 | |+----------------+-----------------+-----------+------+-------------+
Resize a volume¶
To resize your volume, you must first detach it from the server if thevolume driver does not support in-use extend. (See Extend_attached_volume.)To detach the volume from your server, pass the server ID and volume IDto the following command:
$ openstack server remove volume 84c6e57d-a6b1-44b6-81eb-fcb36afd31b5 573e024d-5235-49ce-8332-be1576d323f8
This command does not provide any output.
List volumes:
$ openstack volume list+----------------+-----------------+-----------+------+-------------+| ID | Name | Status | Size | Attached to |+----------------+-----------------+-----------+------+-------------+| 573e024d-52... | my-new-volume | available | 8 | || bd7cf584-45... | my-bootable-vol | available | 8 | |+----------------+-----------------+-----------+------+-------------+
Note that the volume is now available.
Resize the volume by passing the volume ID and the new size (a valuegreater than the old one) as parameters:
$ openstack volume set 573e024d-5235-49ce-8332-be1576d323f8 --size 10
This command does not provide any output.Note: The volume status
reserved
is not a valid state for an extend operation.Note
When extending an LVM volume with a snapshot, the volume will bedeactivated. The reactivation is automatic unless
auto_activation_volume_list
is defined inlvm.conf
. Seelvm.conf
for more information.
Extend attached volume¶
Starting from microversion 3.42, it is also possible to extend anattached volume with status in-use
, depending upon policysettings and the capabilities of the backend storage.Sufficient amount of storage must exist to extend the volume.
Resize the volume by passing the microversion,the volume ID, and the new size (a valuegreater than the old one) as parameters:
$ openstack --os-volume-api-version 3.42 volume set 573e024d-5235-49ce-8332-be1576d323f8 --size 10
This command does not provide any output.
Migrate a volume¶
As an administrator, you can migrate a volume with its data from onelocation to another in a manner that is transparent to users andworkloads. You can migrate only detached volumes with no snapshots.
Possible use cases for data migration include:
Bring down a physical storage device for maintenance withoutdisrupting workloads.
Modify the properties of a volume.
Free up space in a thinly-provisioned back end.
Migrate a volume with the openstack volume migrate command, as shownin the following example:
$ openstack volume migrate [-h] --host <host> [--force-host-copy] [--lock-volume] <volume>
The arguments for this command are:
- host
The destination host in the format host@backend-name#pool.
- volume
The ID of the volume to migrate.
- force-host-copy
Disables any driver optimizations and forces the data to be copied by thehost.
- lock-volume
Prevents other processes from aborting the migration.
Note
If the volume has snapshots, the specified host destination cannot acceptthe volume. If the user is not an administrator, the migration fails.
Transfer a volume¶
You can transfer a volume from one owner to another by using theopenstack volume transfer request create command. The volumedonor, or original owner, creates a transfer request and sends the createdtransfer ID and authorization key to the volume recipient. The volumerecipient, or new owner, accepts the transfer by using the ID and key.
Starting with the Rocky release, Cinder changes the API behavior for the v2 andv3 API up to microversion 3.55. Snapshots will be transferred with the volumeby default. That means if the volume has some snapshots, when a user transfersa volume from one owner to another, then those snapshots will be transferredwith the volume as well.
Starting with microversion 3.55 and later, Cinder supports the ability totransfer volume without snapshots. If users don’t want to transfer snapshots,they need to specify the new optional argument –no-snapshots.
Starting with microversion 3.70 and later, Cinder supports the ability totransfer encrypted volumes. Snapshots must be transferred with the volume.
Note
The procedure for volume transfer is intended for projects (both thevolume donor and recipient) within the same cloud.
Use cases include:
Create a custom bootable volume or a volume with a large data set andtransfer it to a customer.
For bulk import of data to the cloud, the data ingress system createsa new Block Storage volume, copies data from the physical device, andtransfers device ownership to the end user.
Create a volume transfer request¶
While logged in as the volume donor, list the available volumes:
$ openstack volume list+-----------------+-----------------+-----------+------+-------------+| ID | Name | Status | Size | Attached to |+-----------------+-----------------+-----------+------+-------------+| 72bfce9f-cac... | None | error | 1 | || a1cdace0-08e... | None | available | 1 | |+-----------------+-----------------+-----------+------+-------------+
As the volume donor, request a volume transfer authorization code for aspecific volume:
$ openstack volume transfer request create [--no-snapshots] <volume>
The arguments to be passed are:
<volume>
Name or ID of volume to transfer.
--no-snapshots
Transfer the volume without snapshots.
The volume must be in an available
state or the request will bedenied. If the transfer request is valid in the database (that is, ithas not expired or been deleted), the volume is placed in anawaiting-transfer
state. For example:
$ openstack volume transfer request create a1cdace0-08e4-4dc7-b9dc-457e9bcfe25f
The output shows the volume transfer ID in the id
row and theauthorization key.
+------------+--------------------------------------+| Field | Value |+------------+--------------------------------------+| auth_key | 0a59e53630f051e2 || created_at | 2016-11-03T11:49:40.346181 || id | 34e29364-142b-4c7b-8d98-88f765bf176f || name | None || volume_id | a1cdace0-08e4-4dc7-b9dc-457e9bcfe25f |+------------+--------------------------------------+
Note
Optionally, you can specify a name for the transfer by using the--name transferName
parameter.
Note
While the auth_key
property is visible in the output ofopenstack volume transfer request create VOLUME_ID
, it will not beavailable in subsequent openstack volume transfer request show TRANSFER_ID
command.
Send the volume transfer ID and authorization key to the new owner (forexample, by email).
View pending transfers:
$ openstack volume transfer request list+--------------------------------------+--------------------------------------+------+| ID | Volume | Name |+--------------------------------------+--------------------------------------+------+| 6e4e9aa4-bed5-4f94-8f76-df43232f44dc | a1cdace0-08e4-4dc7-b9dc-457e9bcfe25f | None |+--------------------------------------+--------------------------------------+------+
After the volume recipient, or new owner, accepts the transfer, you cansee that the transfer is no longer available:
$ openstack volume transfer request list+----+-----------+------+| ID | Volume ID | Name |+----+-----------+------++----+-----------+------+
Accept a volume transfer request¶
As the volume recipient, you must first obtain the transfer ID andauthorization key from the original owner.
Accept the request:
$ openstack volume transfer request accept transferID authKey
For example:
$ openstack volume transfer request accept 6e4e9aa4-bed5-4f94-8f76-df43232f44dc b2c8e585cbc68a80+-----------+--------------------------------------+| Property | Value |+-----------+--------------------------------------+| id | 6e4e9aa4-bed5-4f94-8f76-df43232f44dc || name | None || volume_id | a1cdace0-08e4-4dc7-b9dc-457e9bcfe25f |+-----------+--------------------------------------+
Note
If you do not have a sufficient quota for the transfer, the transferis refused.
Delete a volume transfer¶
List available volumes and their statuses:
$ openstack volume list+-----------------+-----------------+-----------------+------+-------------+| ID | Name | Status | Size | Attached to |+-----------------+-----------------+-----------------+------+-------------+| 72bfce9f-cac... | None | error | 1 | || a1cdace0-08e... | None |awaiting-transfer| 1 | |+-----------------+-----------------+-----------------+------+-------------+
Find the matching transfer ID:
$ openstack volume transfer request list+--------------------------------------+--------------------------------------+------+| ID | VolumeID | Name |+--------------------------------------+--------------------------------------+------+| a6da6888-7cdf-4291-9c08-8c1f22426b8a | a1cdace0-08e4-4dc7-b9dc-457e9bcfe25f | None |+--------------------------------------+--------------------------------------+------+
Delete the volume:
$ openstack volume transfer request delete <transfer>
- <transfer>
Name or ID of transfer to delete.
For example:
$ openstack volume transfer request delete a6da6888-7cdf-4291-9c08-8c1f22426b8a
Verify that transfer list is now empty and that the volume is againavailable for transfer:
$ openstack volume transfer request list+----+-----------+------+| ID | Volume ID | Name |+----+-----------+------++----+-----------+------+
$ openstack volume list+-----------------+-----------------+-----------------+------+-------------+| ID | Name | Status | Size | Attached to |+-----------------+-----------------+-----------------+------+-------------+| 72bfce9f-cac... | None | error | 1 | || a1cdace0-08e... | None | available | 1 | |+-----------------+-----------------+-----------------+------+-------------+
Manage and unmanage a snapshot¶
A snapshot is a point in time version of a volume. As an administrator,you can manage and unmanage snapshots.
Manage a snapshot¶
Manage a snapshot with the openstack volume snapshot set command:
$ openstack volume snapshot set [-h] [--name <name>] [--description <description>] [--no-property] [--property <key=value>] [--state <state>] <snapshot>
The arguments to be passed are:
--name <name>
New snapshot name
--description <description>
New snapshot description
--no-property
Remove all properties from <snapshot> (specify both–no-property and –property to remove the currentproperties before setting new properties.)
--property <key=value>
Property to add or modify for this snapshot (repeat option to setmultiple properties)
--state <state>
New snapshot state. (“available”, “error”, “creating”, “deleting”,or “error_deleting”)(admin only) (This option simply changes the state of the snapshot in thedatabase with no regard to actual status, exercise caution when using)
<snapshot>
Snapshot to modify (name or ID)
$ openstack volume snapshot set my-snapshot-id
Unmanage a snapshot¶
Unmanage a snapshot with the openstack volume snapshot unsetcommand:
$ openstack volume snapshot unset [-h] [--property <key>] <snapshot>
The arguments to be passed are:
--property <key>
Property to remove from snapshot (repeat option to remove multiple properties)
<snapshot>
Snapshot to modify (name or ID).
The following example unmanages the my-snapshot-id
image:
$ openstack volume snapshot unset my-snapshot-id
Report backend state in service list¶
Each of the Cinder services report a Status and a State. These are theadministrative state and the runtime state, respectively.
To get a listing of all Cinder services and their states, run the command:
$ openstack volume service list+------------------+-------------------+------+---------+-------+----------------------------+| Binary | Host | Zone | Status | State | Updated At |+------------------+-------------------+------+---------+-------+----------------------------+| cinder-scheduler | tower | nova | enabled | up | 2018-03-30T21:16:11.000000 || cinder-volume | tower@lvmdriver-1 | nova | enabled | up | 2018-03-30T21:16:15.000000 || cinder-backup | tower | nova | enabled | up | 2018-03-30T21:16:14.000000 |+------------------+-------------------+------+---------+-------+----------------------------+