NGC Counterfeit Detection | Identify Counterfeit Coins (2024)

Want to Learn More about Counterfeit Detection?

Avoiding and Reporting Counterfeit Coins

Cast Counterfeits

Cast counterfeits are typically the most inferior type of fake. They are usually of such low quality that they were made as a novelty rather than to try to deceive collectors. They are often made out of base metal and frequently have a seam around the edge where the two halves of the mold come together. They will also generally exhibit a grainy texture. Because these fakes are cast rather than struck, they will usually not “ring” like a normal coin when lightly tapped or dropped.

Spark Erosion Counterfeits

These are interesting fakes that usually attempt to replicate smaller denominations, most often ones that are made of copper. Spark erosion counterfeits are created by submerging a genuine coin in an electrolytic bath with the coin placed close to the die. Electricity is then passed through the coin and a spark jumps from the coin to what will become the die, etching the coin’s design into the surface. Once complete, the dies are heavily polished to remove the pitting this counterfeiting method typically leaves. The polishing process cannot remove the pitting from the recesses of the die, however, and, as a result, the raised elements of the counterfeits have a granular appearance. This granularity is especially evident on the reverse of the coin below.

Electrotypes

These are often created by museums to display an extremely accurate replica of a genuine coin for security purposes or to show both sides of a coin at the same time. They are created by pressing the genuine piece into a soft material, thereby creating a negative impression. The inside of that impression is then electroplated to create a shell with the design of one side of the coin. The process is repeated for the other side of the coin and the two sides are then joined together. Electrotypes can often be extremely deceptive. There will often be a seam on the edge, however, and electrotypes are usually not the correct weight. They will also not “ring” like a genuine coin when lightly tapped or dropped because they are not struck.

Transfer Die Counterfeits

These fakes have become increasingly commonplace in the last few decades. Unfortunately, this type of fake can also be the most deceptive. A genuine coin is used to create a die that is an exact mirror image of the coin. This includes any and all marks, scratches or other issues on the surface of the genuine coin. As a result, every fake struck from these counterfeit dies will have the same depressions (marks are called “depressions” on counterfeits). NGC graders look for these repeating depressions as well as overall weak details to identify fakes made from transfer dies. These spurious pieces may also have incorrect weights and compositions as well as unusual luster.

Altered Dates

Altered Mintmarks

There are many ways that counterfeiters attempt to alter a coin’s mintmark. For example, they could add an “S” mintmark to a 1909 VDB Lincoln cent to make it appear to be the rare and desirable 1909-S VDB, or they could remove the mintmark from an 1895-O Morgan dollar to make it look like the extremely rare 1895 issue. There are two primary types of altered mintmarks:

• Added mintmark. A mintmark can be added in a number of different ways. Sometimes the counterfeiters will literally glue the mintmark on. Other times they may use a tool to sculpt a mintmark. Occasionally fakers will even drill into the edge of the coin and push up a mintmark from the inside! These embossed mintmarks are especially common on coins with mintmarks near the edge like Buffalo nickels and can be extremely difficult to detect.
• Removed mintmark. As the name implies, this is when the counterfeiter simply removes the mintmark from the coin. Tool marks will generally be obvious to the trained eye.