- Home
- Electrical and Electronics Measurements
- Measurement of Energy
- Induction Type Energy Meter
Question
Download Solution PDFThis question was previously asked in
FCI JE Electrical Official Paper 2015
Attempt Online
View all FCI JE Papers >
- To isolate the current and potential circuits
- To reduce power loss during loading
- For meters having low current ratings
- To test meters having a large current rating
Answer (Detailed Solution Below)
Option 2 : To reduce power loss during loading
Detailed Solution
Download Solution PDFPhantom Loading:
- Phantom loading is used to test the wattmeter and energy meter.
- The pressure coil is supplied from a voltage source( power is negligible) and the current coil is supplied from another circuit operating at low voltage but at the required current.
- So watt meter/energy meter see rated voltage and rated current but the power used for testing is very low.
- This is an indirect way of the load test.
- Direct loading requires rated voltage and current and so power is large.
- Testing at various power factors is also easy in phantom loading.
- It requires only a phase-shifting transformer to shift the phase of voltage with respect to current.
- The power required is less, depending on the voltage required to send rated current( even 5 to 10 percent,) under phantom loading.
Solution:
Phantom loading for testing of energy meters is used to reduce power loss during loading.
Latest FCI JE Updates
Last updated on Jan 2, 2024
FCI JE Recruitment Notification 2024 is yet to be released. Earlier, theFCI JE Result was announced for the Phase II exam, which was was held on 5th March 2023. Earlier, the FCI JE Phase I was held on1st, 7th, 14th, 21st, and 29th January 2023.A total number of 63 vacancies were reelased for FCI Junior Engineer 2022. The selection process comprises two stages namely Online Test & Skill Test. To prepare in an effective manner for the exam, candidates can refer to the FCI JE Previous Year Papers to analyze the exam and improve their chances of selection for the Junior Engineer post.
India’s #1 Learning Platform
Start Complete Exam Preparation
Daily Live MasterClasses
Practice Question Bank
Mock Tests & Quizzes
Get Started for Free
Download_on_the_App_Store_Badge_US-UK_RGB_blk_4SVG_092917Trusted by 6.1 Crore+ Students
More Induction Type Energy Meter Questions
Q1.Which type of electric meter is typically used for measuring energy consumption in large commercial and industrialproperties with high energy needs?
Q2.The cores of electromagnets used in energy meter are made up of
Q3.What is the special property of 'Mutemp' when used as a shunt on the brake magnate in the energy meter?
Q4.A 230 V, 1-phase watt hour meter records a constant load of 10 A for 10 hours at unity p.f. If the meter disc makes 2300 revolutions during this period, what is the meter constant in revolutions/kWh?
Q5.Directional induction type over current relay is used for protection of
Q6.Induction type single phase energy meter measures electric energy in
Q7.What is the maximum current rating of an induction meter?
Q8.Which of the following parts of a single phase induction energy meter are NOT in direct connection with the supply?1. Current coil2. Potential coil3. Aluminium disc4. Braking magnet
Q9.Which of the following is NOT a part of a digital energy meter?
Q10.The adjustment made with the magnetic shunt in three-phase, two-element energy meter for the rotation of aluminum disc to be zero is _______.
More Measurement of Energy Questions
Q1.Which type of electric meter is typically used for measuring energy consumption in large commercial and industrialproperties with high energy needs?
Q2.The cores of electromagnets used in energy meter are made up of
Q3.Some special features are incorporated in an electrodynamometer wattmeter to make it a low power factor type wattmeter. Identify which of the following is NOT one of the features.
Q4.‘Creeping’ in energy meters is related to:
Q5.A 230 V, 1-phase watt hour meter records a constant load of 10 A for 10 hours at unity p.f. If the meter disc makes 2300 revolutions during this period, what is the meter constant in revolutions/kWh?
Q6.Directional induction type over current relay is used for protection of
Q7.Induction type single phase energy meter measures electric energy in
Q8.What is the maximum current rating of an induction meter?
Q9.Which of the following parts of a single phase induction energy meter are NOT in direct connection with the supply?1. Current coil2. Potential coil3. Aluminium disc4. Braking magnet
Suggested Test Series
View All >
270 Total Tests with 1 Free Tests
Start Free Test
More Electrical and Electronics Measurements Questions
Q1.What is the purpose of the trigger circuit in a Cathode Ray Oscilloscope (CRO)?
Q2.Which component is responsible for generating the time scale or time reference in a Cathode Ray Oscilloscope (CRO)?
Q3.Which type of electric meter is typically used for measuring energy consumption in large commercial and industrialproperties with high energy needs?
Q4.What is a common technique used to reduce core losses and the magnetising component in a current transformer?
Q5.With reference to PMMC instruments, which of the following statements are correct?I. For PMMC instruments, the scale is not uniform.Il. PMMC instruments can be used for AC as well as DC quantities.III. In PMMC instruments, power consumption is low.IV. PMMC instruments offer a high torque/weight ratio.
Q6.Shunt is connected in parallel to ammeter to;
Q7.Schering bridge is used to -
Q8.In a CRO which of the following is/are part of electron gun?
Q9.Linear meter with a 1% of full scale accuracy should have __________ on the 1 V range .
Q10.The cores of electromagnets used in energy meter are made up of