Super Easy | How to Install Windows After Replacing Hard Drive🔥 (2024)

The best way to speed up a computer or improve its performance is to replace an old hard drive, but reinstalling Windows is a poor idea because it has many procedures. In the previous article, we discussed how to install Windows 10 on a new hard drive from USBin detail. This article from EaseUS will walk you through how to install Windows after replacing hard drive. Most importantly, following the instructions below, you can change the disk without reinstalling the operating system. Hurry up and learn how to load Windows on a new hard drive.

Do You Have to Reinstall Windows After Replacing Hard Drive

Replacing a laptop's hard drive is becoming increasingly popular for its convenience and efficiency in solving disk or computer problems. The following are some common scenarios you need to change your hard drive:

But do you need to reinstall Windows after a hard drive replacement?

The answer is in the affirmative. No matter what motivates you to replace your hard drive, one common concern you will face is how to install Windows after doing so. Your computer can only be used generally after system reinstallation.

In the next part, let's learn how to install Windows after changinghard drive and how to install Windows on a new hard drive. Keep moving on!

How to Install OS After Replacing Hard Drive

After replacing the hard drive, how to reinstall Windows after replacing hard driveshould be the top priority. The installation process usually includes three parts. Let's come to the details. Here, take Windows 10 as an example. The following ishow to reinstall Windows 10 after replacing hard drive.

1. Part 1. Create Windows 10 Installation Media
2. Part 2. Boot from Windows 10 Installation Media
3. Part 3. Install Windows on New Hard Drive

Part 1. Create Windows 10 Installation Media

To install Windows 10 operating system, you need to create Windows 10 installation media. In addition, the easiest and most common way is to use a bootable USB drive. You need to create one to help reinstall or clean install Windows 10 on the new drive.

Creating a Windows 10 bootable USB is simple. You can refer to this article for help.

Part 2. Boot from Windows 10 Installation Media

You can perform the steps below to boot your computer from a Windows 10 bootable USB drive.

Step 1. Insert the bootable USB drive into your computer with a new hard disk installed.

Step 2. After the computer has been started, press and hold the BIOS key (F2, Del, F10, or F12, depending on the model) until the BIOS screen appears.

Step 3. Navigate to Boot Manager to set the bootable USB as the first boot device in the BIOS settings.

Step 4. Save the changes and exit the BIOS. Your computer will then boot from the bootable USB.

Part 3. Install Windows on New Hard Drive

The steps toinstall Windows on a new drive are as follows:

Step 1. You'll enter Windows Setup automatically when the computer boots up again. Select your Language and other preferences settings and click Next.

Step 2. Tap Install now.

Step 3. Click I don't have a product key. (You will be prompted for your Windows 10 product key during the Windows Setup process. When you select the I don't have a product key option, Windows will eventually activate itself.)

Step 4. Click the I accept the license terms box and click Next.

Step 5. Select Click Custom: Install Windows only (advanced).

Step 6. Select an unallocated drive, tap New, Apply, and then Next.

Step 7. You will get new partitions. Select the primary partition and tap Next.

Step 8. Wait for the installation process to be completed.

All the steps for installing Windows after replacing the hard disk are listed above. After reinstalling the operating system, you can reload your applications and restore your personal files from the backup on the new hard drive. That sounds difficult, right? Additionally, it takes a lot of time and is laborious.

But do not worry. You have other ways out. Here is a way to help you replace a hard drive without reinstalling Windows. Let's learn how in the following.

Here is an article on how to install Windows from BIOS from USB. You can read it if needed.

How to ReplaceHard Drive Without Reinstalling Windows

To use the laptop normally, you must reinstall the necessary software and the Windows operating system after replacing the hard drive. This is problematic since it takes a lot of time. Is it possible to replace a laptop's hard drive with an SSD without reinstalling Windows?

The answer is yes. You can replace a hard drive without Windows reinstallation. It is called cloning. You can clone your hard drive to another drive without reinstalling Windows.

For that, you need to use professional disk cloning software because Windows does not have built-in cloning software. Under such circ*mstances, EaseUS Disk Copy is the right one to meet your needs.

EaseUS Disk Copy is a professional disk cloning utility for Windows 11/10/8/7. It can help you clone the system, disk, partition, etc., and transfer your Windows 10 from HDD to SSD without losing data. In addition, it can help you clone an M.2 SSD with only one slot and clone a hard drive with bad sectors.

After installing EaseUS Disk Copy on your computer, you can perform the steps below to clone your hard disk to another one without reinstalling Windows or transfer data from one SSD to another without losing data.

Prior Notice:

• The "Sector by sector copy" asks the size of your destination disk to be at least equal to or larger than that of the source disk. Leave this feature unchecked if you wish to clone a larger hard disk to a smaller hard disk.
• All data on the destination disk will be completely erased, so take care.

Step 1. To start copying/cloning an entire disk to another, choose this disk as the source disk under "Disk Mode" and click "Next".

Step 2. Choose the other disk as the destination disk.

Step 3. Check the disk layout of the two disks. You can manage the disk layout of the destination disk by selecting "Autofit the disk", "Copy as the source" or "Edit disk layout".

• "Autofit the disk" makes some changes by default on the destination disk layout so that it can work at its best status.
• "Copy as the source"does not change anything on destination disk and the layout is the same as source disk.
• "Edit disk layout" allows you to manually resize/move partition layout on this destination disk.

Tick the "Check the option if the target is SSD" option to put your SSD in its best performance.

A message now appears, warning you that data will be lost. Please confirm this message by clicking "OK" and then click "Next".

Step 4. Click "Proceed" to officially execute the task.

To Sum Up

How to install Windows after replacing hard drive? Have you got your answer now? In this article, you can learn, after replacing the hard drive, how to install Windows in a step-by-step guide. As you can see in the article, reinstalling Windows is a little complicated after changing a hard drive.

Fortunately, in this article, you can also learn how to replace a hard disk without reinstalling Windows with the help of EaseUS Disk Copy. It is a practical cloning utility that can help you perform various cloning tasks. It can also help you solve issues like the cloned hard drive showing wrong size. More valuable features are waiting for you to explore!

FAQs on How to Install Windows After Replacing Hard Drive

1. Do I have to install Windows after replacing hard drive?

Yes, you will have to install your Windows if you replace your hard drive. But if you clone your hard drive to another drive, you do not need to reinstall Windows. This is because cloning allows you to replace a hard drive without reinstalling Windows.

2. Does replacing a hard drive remove the OS?

Yes, replacing the hard drive will remove your operating system (OS). If your OS is stored on your hard drive, when replacing the hard drive, you need to reinstall your OS to make your computer run as usual.

3. How to transfer OS from HDD to SSD without reinstalling Windows?

If you want to transfer your operating system from an HDD to an SSD without reinstalling Windows, you can use a way called cloning. Cloning lets you migrate your OS from HDD to SSD without Windows reinstallation.