Tips to Unlock BitLocker Without Password and Recovery Key? (2024)

• Step 1. Double-click the drive to bring up the password window, or right-click on it and select Unlock Drive.

• Step 2. Click More Options.

• Step 3. In the opened box, you will see two options. Click Enter Recovery Key.

• Step 4. To unlock BitLocker, copy the code you previously saved to a text file and enter it as the recovery key.

• Step 5. Finally, click the Unlock The windows drive will be unlocked, and you can access it now.

• You must have access to the file containing the recovery key.
• If you do not have this code, you can search for a file called BitLocker recovery key.txt.
• After decryption, the drive is unlocked and will no longer ask you for a password when you log in. If you need to upgrade the security level after decryption, it is recommended to set another password. This time try to remember it, though.

1. Wait for Windows to detect the drive.
2. Press and hold Win + E to launch File Explorer.
3. Click on This PC in the sidebar.
4. Right-click on the drive and select Format.
5. You can select the disk format from the File system drop-down menu in the popped window.
6. In Volume label, type the name of the drive.
7. Check the Quick Format option to format the drive quickly.
8. Finally, click the Start

1. Run Command Prompt as Run as administrator.
2. After running Command Prompt, type in diskpart command and press enter.

3. Now enter listdisk command to display a list of drives in your system.

4. Check which number is related to your USB flash drive.

5. Type in clean command and wait for everything in the drive to be deleted.
6. When you use this command for a drive or disk, any partition or volume on the disk will be formatted. This is how using a simple word in Diskpart completely deletes all partitions on a disk and formats it.

7. Once you see the message Succeeded in cleaning the disk at the bottom line of this command, it means that the flash drive data has been completely deleted and the drive formatted.
8. Now enter create partition primary command and press enter.

9. After diskpart successfully creates the specified partition, type in format fs = ntfs and press enter.
10. This process may take a few minutes, depending on your USB flash drive capacity, as this will be done in normal format and not in Quick format. If you want this to be done faster, use the format fs = ntfs quick command instead of the format fs = ntfs

11. Now you need to assign a drive letter to the partition that you have created and then formatted.
12. To do this, type in assign command and enter.

13. Following the above commands, you can format a computer hard drive, external hard drive, or any other storage device, as well as USB flash drives.

1. Run Disk Utility. Go to Applications> Utilities, or press Command + Space and type Disk Utility.
2. After opening Disk Utility, you will see a list of the available drives on the left. Select the drive you need to format. Note that formatting your drive will erase all its content.

3. From the four options in the main window, click Erase.

4. The next step is to name the drive. This name can be anything you like, but as a best practice, try to choose a specific name that describes the contents of the drive.
5. Click on Security Options. This will open another window that lets you choose how you want the drive to be formatted, with a slider from Fastest to Most Secure. This is an important step if you want to ensure that all of the current files on the drive will be deleted.
6. Fastest clears the drive data by removing the extra data, but the original files remain intact, although they will stay hidden. This means that you or someone else can easily recover the files using data recovery software, which is not necessarily a good idea. Move the slider to the second option, where it says This option writes a single pass of zeros over the entire disk. This option will overwrite the entire drive.
7. For added security, keep moving the slider to the right. The next step gives you the option to rewrite the drive three times. Move the slider to the bottom of the slider to Most Secure, which will overwrite the drive seven times. But you will have to wait for a long time (depending on the size of the drive) for it to be available for reuse.

8. Click Erase and wait for the drive's contents to be cleared and the drive ready to use. A progress bar shows where your drive's formatting is and how long it will take to complete the process.

1. Type and search Control Panel in the search box next to the Start menu, and open it.
2. Find and click System and Security->BitLocker Drive Encryption.
3. Select the drive that you want to turn the encryption off, and click Turn Off BitLocker.
4. After that, you will receive a message asking you to confirm the decryption process. Click Decrypt and wait for the process to complete.

Yes, it is possible to unlock a BitLocker-encrypted drive on a different computer. But you need to have the BitLocker recovery key or the password used to encrypt the drive.

If you don’t have the BitLocker password and recovery key, you may need to format the drive to remove the encryption, or use the third-party tools, such as Passware Kit, Elcomsoft Forensic Disk Decryptor, and Elcomsoft Distributed Password Recovery.

If you repeatedly enter the wrong BitLocker recovery key, the drive will eventually enter a "suspended" state, locking you out. In this situation, you'll need to contact your organization's IT department or use a data recovery service, as the data on the drive may become permanently inaccessible.