Use these helpful troubleshooting steps to resolve some common issues that may impact your network signal.
- Try this first
- Next steps
- Report location
- Contact us
Try this first
Check the following common causes
- Your line is active.
- You're in acovered area.
- Airplane mode is turned off.
Wi-Fi Calling is turned off. If the problem happens whenWi-Fi calling is on, followWi-Fi Calling problemsinstead.- The copper plating on your SIM card has no chips or discoloration. If it does,contact usfrom a device that has service if you have one, or visit a Metro store for a replacement.
If your device meets the criteria and you still have no signal, proceed with the next troubleshooting steps.
Check the following common causes
Next steps
Troubleshoot signal and service errors
- Restart your device and check for signal bars.
- Change
Wi-Fi Calling preferences to Cellular Preferred or Cellular Only to preventWi-Fi Calling issues from interfering with the signal. - Turn off
Wi-Fi to make sure you're using the cellular network. - Set the deviceNetworkmode toAuto.
- Remove any cases or covers from the device.
- (Apple only) Reset network settings (select Settings > General > Reset > Reset Network Settings) and verify the
T-Mobile Carrier Settings are up-to-date. You can do this overWi-Fi . Update your carrier settings on your iPhone or iPad - Apple Support.
- Update the device software to the latest version. You can do this over
Wi-Fi . - Perform a manual network selection for networks your device can connect to. If you experience:
- Registered to
T-Mobile network, but no signal: The problem is likely low or no coverage. If the coverage map showed good coverage, try switching to 2G or turning off LTE. T-Mobile network is not available: The problem is likely no coverage. If the coverage map showed good coverage, perform a master reset.T-Mobile network is available but cannot connect: We'll need to check your SIM card when you contact us.- Network selection gets stuck or gives error: Perform a master reset. If that doesn't help, we'll check your SIM card when you contact us.
- Registered to
- Check for signal.
If the phone still has no signal bars or shows a "no service" error after you've worked through these troubleshooting steps,contact usfrom a device that has service, or visit a Metro store.
Troubleshoot signal and service errors
Report location
Is your location without service?
Restart your device. If that doesn't help, follow the troubleshooting steps on this page to take care of any other potential problems. If you're still experiencing issues,contact usfrom a device that has service if you have one, or visit a Metro store to report the problem.
Is your location without service?
Need more help?
Visit our Metro by