What Causes Canning Lids to Buckle? (+ Proper Tightening) (2024)

Some of the links below are affiliate links, which means I will earn a commission at no additional cost to you, if you click through and make a purchase. Regardless, I only link to products we use on our homestead or believe in.

What causes canning lids to buckle when water bath or pressure canning food? And how can you prevent this from happening in the first place? I’m showing you how to properly tighten your canning lids to practice the safest canning methods for the best home food preservation.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (1)

Knowing how to properly can food is a skill, and many tips and tricks that have been handed down from great-grandma over the years may not be the best or safest canning methods.

Thankfully, we have tested and approved canning methods to help us know how to safely and confidently can food at home to preserve the garden harvest. In this post, learn how to prevent lid buckling, how to properly tighten canning lids, know whether improperly canned food is safe to eat, and what the red flags to watch for.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (2)
Table of Contents[Hide][Show]
  • What causes lids to bulge or buckle when canning?
  • How do you keep canning lids from buckling?
  • How tight should lids be when canning?+
    • Fingertip Tightening Process
  • If buckling happens, is the food still safe to eat?
  • Everything Worth Preserving
  • More Articles You May Enjoy

What causes lids to bulge or buckle when canning?

There are several reasons canning lids will bulge or buckle and even not seal during the canning process. The three main reasons are overtightening or under-tightening of the band, incorrect use of headspace, and faulty lids. For more information, see my article on The Science of Home Food Preservation.

  • Overtightening or under-tightening of the band will inhibit the oxygen process while canning. Oxygen needs to be exhausted out of the jar during the canning process for it to be safe to eat and effectively canned.
    • Overtightening can cause the lid to buckle during the canning process.
    • Under tightening can cause the band to work its way loose and cause the lid to come off altogether during the canning process.
  • Incorrect use of headspace can cause the liquid and food to push the lid off entirely because there may not be enough space in the jar to allow the oxygen to exhaust. Each canning recipe will tell you whether to use 1/4 inch, 1/2 inch, 1 inch, etc. of headspace. This will vary from recipe to recipe, so always check your approved recipe for specifications.
  • Faulty lids may cause the lids to buckle, seal improperly, or not seal at all. Ball and Kerr lids work well, as do ForJars (coupon code “Modern10”)and Denali lids (“SPENDNSAVE” discount code to get a 15% discount for every $75 order).

Pro Tip: My favorite lids, however, are Superb Lids. I get mine through Azure Standard (Coupon Code “MKN10” – $50 minimum, for first-time customers only). Superb lids are made in the USA (Ohio) with a thicker seal compound and improved lid due to the increased pounds of pressure needed to seal (greatly reducing false seals). Better yet, they’re in 60 or 300 packs, so you don’t go through a box in one day’s worth of canning.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (3)

How do you keep canning lids from buckling?

There is a general process food goes through when being canned. This is why we have specific recommendations for canning. These recommendations ensure a safe and successful canning process. Read below for precise instructions on the proper canning process for your lids.

  1. Place food in a clean glass canning jar.
  2. Remove air bubbles and add more food if needed to maintain headspace.
  3. Wipe the rim of the jar with a clean, damp paper towel to make sure there are no leftover food or dirt particles (a cloth dipped in vinegar helps cut through any greasy foods on the rim of the jar, such as bone broth).
  4. Place the lid on the jar.
  5. Use the “Fingertip Tightening Process” (see instructions below) to correctly tighten the band over the lid and onto the jar.

How tight should lids be when canning?

You have spent so much time preparing your food, preparing your jars and lids, and are now looking forward to shelves and pantries full of preserved food. Knowing how to tighten a lid and band correctly is very important.

Can you over-tighten canning lids? What if you under-tighten your lids? It is easy to know how to avoid both of these tightening problems if you use the following process below.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (5)

Fingertip Tightening Process

This fingertip-tightening process will help ensure you don’t over or under-tighten your lids. You will successfully can more jars using this method as well.

  1. Using only your thumb, index and middle fingers (three fingers total), equally hold your band.
  2. Place the band over the lid and onto the jar.
  3. Twist just until you meet some resistance.
  4. Then simply twist 1/4 turn more.

If you find this confusing, refer to the video tutorial accompanying this blog post.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (6)

If buckling happens, is the food still safe to eat?

In most cases, the lid, despite being buckled, will still seal on the jar. The food is still safe to eat; however, don’t store it on the shelf.

To safely be able to eat this jar of food, either freeze it or put it in the fridge. Be sure to use it within a few days if you put it in the refrigerator.

Now that you know how to properly tighten your canning lids, you should be able to avoid and prevent unnecessary lid buckling.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (7)

Everything Worth Preserving

Looking for more fermented recipes? Discover the nine home food preservation methods tosafelystore delicious food for year-round eating withall ofmy step-by-step tutorials, recipes, and easy-to-use charts.

Learn everything you need to know about cold storage (aka freezer), water bath/steam canning, pressure canning, dehydrating, fermenting, freeze-drying, root cellar, infusion, and salt/curing in the new book,Everything Worth Preserving.

What Causes Canning Lids to Buckle? (+ Proper Tightening) (8)

More Articles You May Enjoy

  • Tips for Home Food Preservation – Seasonal Preserving Each Month
  • Home Food Preservation- Preserving Plan for a Year’s Worth of Food
  • 9 Ways to Preserve Food at Home
  • Botulism Prevention and Preservation Safety Tips
  • Does Pressure Canning Ruin Bone Broth
  • 129+ Best Canning Recipes to Put Up This Year
  • How Do You Know if a Canning Recipe is Safe
  • How to Pick the Best Preserving Methods
  • How to Convert Recipes for Canning + Safety Tips
What Causes Canning Lids to Buckle? (+ Proper Tightening) (2024)

FAQs

What Causes Canning Lids to Buckle? (+ Proper Tightening)? ›

During processing air inside the jar expands and venting must take place to allow air to escape and create a vacuum seal when the jar cools. If the ring band was applied too tightly on the lid, a buckle forms as the air forces a path to escape.

Why are my canning lids buckling? ›

Buckled lids are always a result of steam (or product, in the case of over-filling) attempting unsuccessfully to escape from the canning jar during the water bath or pressure canning process. This is most frequently caused by the lid being held too tightly to the rim of the jar by the ring/band.

What happens if you over tighten canning lids? ›

It is important not to use force or to use jar tighteners when applying two-piece lids. During processing, air is forced out of the jar. If the screw band is too tight, air cannot escape. Air must be able to escape from the jar during processing.

What causes a tight seal to form on a canning jar? ›

A vacuum seal occurs when heat applied to the contents during processing causes contents to expand and drives air from the jar. During processing, heated air escapes from under the lid creating a vacuum. As the jar cools, the lid contracts and a seal is formed.

Why are my lids loose after canning? ›

There are several reasons canning lids will bulge or buckle and even not seal during the canning process. The three main reasons are overtightening or under-tightening of the band, incorrect use of headspace, and faulty lids.

Are buckled canning lids safe? ›

University of Missouri Extension says not to even bother storing the jar: The seal on a jar with a buckled lid has a very high failure rate so this food would not be safe to store.” Prevent buckling canning lids.

What does a buckled canning lid look like? ›

Buckled lids have a crimp or crease in them that occurs during canning and is typically caused by over tightening the screw band. Avoid over tightening screw bands by using only your fingers, not your whole hand, to tighten the screw band. This is called “fingertip tight.”

What happens if you leave too much headspace when canning? ›

If too much headspace is allowed, the food at the top is likely to discolor. Also, the jar may not seal properly because there will not be enough processing time to drive all air out of the jar.

When should you throw away canning lids? ›

The standard canning lid is a two-piece lid consisting of a flat metal disk and a screw band. The bands are reusable unless they are rusty, bent, or dented. Use a new metal disk each time. Using the metal disk more than one time risks seal failure.

Should water cover the lids when canning? ›

Jars must be covered by water—about 1 to 2 inches of water. Add more hot water from a separate kettle, if needed. Turn up the heat to get water in canner to boil.

What is a false seal when canning? ›

A false seal can occur when jar rims are not wiped clean before processing, if a jar is not filled correctly, or if products are not processed correctly. Jars may appear to be sealed, but may come unsealed later. (If a jar does not seal at all, place it in the refrigerator and re-process it within 24 hours.)

How to tell if canning failed? ›

Listen for the Ping

After removing jars from the canner, you should hear a 'ping' as each jar cools. This sound is a good indication that the jar has sealed properly.

What happens if my lids don't seal when canning? ›

Take the jar that did not seal during processing, remove the lid, and increase the headspace to 1 ½ inches. This will allow for food and/or liquid expansion when freezing. The canning lid may be reused when freezing. Foods in single unsealed jars can be stored in the refrigerator and consumed within a few days.

What causes jar lids to buckle when canning? ›

During processing air inside the jar expands and venting must take place to allow air to escape and create a vacuum seal when the jar cools. If the ring band was applied too tightly on the lid, a buckle forms as the air forces a path to escape.

How do you make a lid fit tighter? ›

However, there's a simple, effective, and often overlooked solution — aluminum foil. This kitchen staple, typically reserved for wrapping leftovers or lining baking trays, can be a game-changer when you need to create a tight seal on pots and pans.

How long should you boil when canning? ›

Check the water level. If the water does not cover the jars by 1 to 2 inches, add boiling water as needed. Bring to a rolling boil, cover the canner and boil for 10 minutes if using 4-, 8- or 12-ounce jars or for 15 minutes if using 16-ounce jars.

Why are my canning lids popping up and down? ›

If the lid “pops” up and down with your finger when you press it, it's not sealed and needs to be reprocessed. If it doesn't move at all, it's likely sealed. Note: Don't test canned foods until they are completely cooled and you've given them several hours to seal! Doing so might create a false seal and unsafe food.

Should canning lids be wet or dry? ›

Oven Method Sterilization

Wash each canning jar or mason jar and lid with hot soapy water then rinse but don't dry them. Place each clean jar on a baking tray and place in the oven for 10 minutes. Soak the lids in boiling water for five minutes.

Why did my jars leak during pressure canning? ›

During heat processing contents of the jar expand. Too little space between the lid and food/liquid forces liquid out of the jar when it is heated. Use correct headspace when filling jars.

Top Articles
5 common smart home problems and how to solve them
What Temperature Kills Bacteria in the Washing Machine?
Zabor Funeral Home Inc
News - Rachel Stevens at RachelStevens.com
Lost Ark Thar Rapport Unlock
Dr Doe's Chemistry Quiz Answer Key
Kent And Pelczar Obituaries
Weapons Storehouse Nyt Crossword
Strange World Showtimes Near Amc Braintree 10
World of White Sturgeon Caviar: Origins, Taste & Culinary Uses
Craigslist Pikeville Tn
Worcester On Craigslist
Simon Montefiore artikelen kopen? Alle artikelen online
Hca Florida Middleburg Emergency Reviews
Kris Carolla Obituary
Craigslist Free Stuff Santa Cruz
2 Corinthians 6 Nlt
Jinx Chapter 24: Release Date, Spoilers & Where To Read - OtakuKart
Paychex Pricing And Fees (2024 Guide)
Shasta County Most Wanted 2022
Byui Calendar Fall 2023
north jersey garage & moving sales - craigslist
Jenna Ortega’s Height, Age, Net Worth & Biography
Scream Queens Parents Guide
Rochester Ny Missed Connections
Abga Gestation Calculator
Movies - EPIC Theatres
O'reilly's In Monroe Georgia
Miles City Montana Craigslist
Downloahub
Experity Installer
Diggy Battlefield Of Gods
Los Amigos Taquería Kalona Menu
Vitals, jeden Tag besser | Vitals Nahrungsergänzungsmittel
To Give A Guarantee Promise Figgerits
Tiny Pains When Giving Blood Nyt Crossword
Trizzle Aarp
Panorama Charter Portal
Barstool Sports Gif
RECAP: Resilient Football rallies to claim rollercoaster 24-21 victory over Clarion - Shippensburg University Athletics
Best GoMovies Alternatives
Jamesbonchai
Jaefeetz
Best Conjuration Spell In Skyrim
Walmart Careers Stocker
Gw2 Support Specter
A rough Sunday for some of the NFL's best teams in 2023 led to the three biggest upsets: Analysis
A Man Called Otto Showtimes Near Cinemark Greeley Mall
Wera13X
How To Connect To Rutgers Wifi
Obituary Roger Schaefer Update 2020
Latest Posts
Article information

Author: Fr. Dewey Fisher

Last Updated:

Views: 6112

Rating: 4.1 / 5 (62 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.