There is no surprise that bonders, primers and dehydrators are confusing. All three products aid in one common goal – increasing adhesion to the natural nail. What most people don’t realize is the similarity stops there. Each product differs both chemically and in the way it actually promotes adhesion.
Bonders
Products like PH Plus or OPI’s Bond Aid® are a bit more universal. These are solvent based formulations used to remove oils and raise the pH of the natural nail. Raising the PH of the natural nail occurs because of their basic chemistry. This allows many different nail enhancements to stick better. Our bonder is called PH Plus. If you have an acrylic customer that lifts even with primer, PH plus should be applied prior to primer. If you are just polishing natural nails, a quick wipe with PH Plus helps prevent chipping. Basically, anything a nail technician needs to adhere better, PH Plus is a good first step.
When should you be using a bonder?
- Before nail polish
- Before gel polish
- Before UV/LED Gels
- Bonders can be used with any nail enhancement to help promote adhesion.
- Acrylics: Before primer on clients who are prone to lifting.
Primers
Primers could conceivably be considered a bonder. We separate the two because 1) Both products promote adhesion differently 2) Primers and bonders are not interchangeable. Acrylics for example almost always require a primer, a bonder shouldn’t be used as an alternative. Primer (whether acid or not) serve one primary purpose: Preparing the nail bed for acrylics. Chemically they are much more corrosive to the natural nail. The primary function of primer is to bond the acrylic to the nail plate much like the roots of a tree to the ground. Non-acid primers do have a slight corrosive property and should be applied with care to avoid contacting soft tissue, but are still considerably less dangerous to the skin than acid based primers. In the event of a spill, non-acid primers (Magic Bond) are far less likely to cause a chemical burn to the skin. Primer is only applied to the natural nail.
When should you be using a Primer?
- Always before applying acrylics. (Primer is optional for Nomma Plus, recommended for “problem-lifters”)
- Before UV/LED Gels
- Pro Tip: Dab the free edge of the natural nail with Magic Bond to help prevent Gel Polishes from peeling on even the most stubborn of clients.
Dehydrators
Dehydrators, are similar to bonders and pretty universal. They prepare the natural nail surface with the end goal of better adhesion. Dehydrator works on the premise that it dissolves the oils in the nail allowing for a more desirable nail surface.Our Dehydrator was officially discontinued from future production in 2017. We previously produced a Dehydrator, but the product benefits are significantly less than PH Plus (Bonder) or our Magic Bond Primer.
When should you be using a Dehydrator?
- Before nail polish
- Before gel polish
- Before UV/LED Gels
- Dehydrator can be used with any nail enhancement to help promote adhesion.
- Acrylics: Before primer on clients who are prone to lifting.
All three of these products could be used together but there are no stacked or layered benefits from doing so. If you were going to use all three: Dehydrator would go on first and remove the oils, Bonder would be used second to raise the pH level of the natural nail, and Primer would be used third to help attach the enhancement to the nail.
Our Recommendation:
You should always have a primer. Primer is an important step in completing a proper set of acrylic nails. For other enhancements, you don’t need both a bonder and a dehydrator, but you should use one. We definitely recommend PH Plus over dehydrator because our Bonder is a more balanced and complete adhesion promoter.
We would love to hear your feedback. We offer free samples of any product we sell; contact us to test the differences for yourself.
DeEnterprises Inc.Buy Better. Buy Smarter. Buy Direct.
www.dnails.com
For more information, call us at (800)433-4630
By Peter DeSantis the Marketing Director at DeEnterprises Inc., a Chemical Manufacturer ofManicure and Pedicure Products. You can find Peter onGoogle+andTwitter.
FAQs
【Using Tips】- The biggest difference between nail primer and dehydrator, is that nail primer can be used as a base coat. The nail dehydrator is placed on your natural nail before anything else, creates a surface that nail polish, acrylic nails can easily bind to, after that is when a nail primer is put on.
Is nail primer the same as dehydrator and bonder? ›
If you were going to use all three: Dehydrator would go on first and remove the oils, Bonder would be used second to raise the pH level of the natural nail, and Primer would be used third to help attach the enhancement to the nail.
Is nail Prep the same as a dehydrator? ›
The Nail Prep - also known as Nail Dehydrator - is a Degreasing Liquid that is used during Nails Extension to gently Dehydrate the Natural Nail Surface, before proceeding with the Application of the Nail Primer.
What does dehydrator and primer do for nails? ›
NAIL PREP DEHYDRATOR: It is especially to get rid of the oil and dry up the whole cuticle in the nail bed area. Nail PRIMER: It's less corrosive and works like double-sided tape to stick nail and product together.
What is nail primer bonder? ›
It is a UV gel base that is applied directly to the natural nail. This product is a 2 in 1 product that acts as a primer and as a gel base. The bonder is acid free which increases the adhesion of the gel.
Do you need both nail primer and dehydrator? ›
Let's clear it up! 👉🏼 Dehydrator is a cleanser for the natural nail and Primer helps aid adhesion between product and the natural nail. Dehydrator MUST go FIRST, followed by Primer. For most brands, Dehydrator generally comes in a clear bottle and Primer comes in a tinted bottle— so as not to mix them up!
What is nail bonder used for? ›
Bonder is a UV gel-based solvent you apply directly to natural nails. It binds to keratin in your nail beds to create a strong bond between nails and gel polish. Bonder helps gel nail polish stick to your nails as they cure under UV light.
What is the difference between bonder and primer? ›
Often the term “bonder” is applied to gel systems, and “primer” is for acrylic, but they both have a similar function in that they bind to the keratin in the nail bed to create a stronger bond for the enhancement product.
Which nail primer is the best? ›
10 Best Nail Primers Of 2023 For The Perfect Polish
Top Picks | CHECK PRICE |
---|
Best Non-Acidic:Gelish ProBond Acid Free Nail Primer | Price on Amazon Price on Walmart |
Best For Fast Drying:Morovan Acid-free Primer | Price on Amazon Price on Walmart |
Best No Burning Sensation:Mia Secret No Burn Acid Free Primer | Price on Amazon |
7 more rowsJul 31, 2023
What is the best thing for dehydrated nails? ›
Best treatment for dry nails and cuticles: products for damaged...
- Burt's Bees Lemon Butter Cuticle Creme.
- CND SolarOil Nail and Cuticle Conditioner.
- Mavala Mavapen Cuticle Oil.
- Hand and Nail Treatment Cream.
- OPI Prospa Nail and Cuticle Oil.
- NCLA Beauty So Rich Vitamin-E Infused Cuticle Oil.
A bonder ties the principal coating to the nail. Dazzle Dry's bonder is called Base Coat—an elastic layer that sticks to both the nail and lacquer.
What is a PH bonder for nails? ›
PH Bond is used in the preparation of the nail as a dehydrating agent. This product is essential in the proper preparation of the nail plate prior to application of Harmony Acrylic, Reveal Gel and Gelish.
Do you put nail primer on before or after tips? ›
Your primer is always applied first.
Is bonding primer necessary? ›
Adhesive bonding primer is critical for several reasons: Improved Adhesion: Some materials have low surface energy, which means they don't bond well with adhesives. Primers increase the surface energy, allowing for better bonding between the adhesive and the substrate.
What is bonding primer good for? ›
It is specially formulated to bond to a variety of challenging substrates and reduces the need for sanding dense and glossy surfaces – making it an ideal primer choice for painting tile, glass, Kynar®, and vinyl. This water-based formula has a quick dry time and can be used under Alkyd, Oil, and Water-based topcoats.
Can I use alcohol as nail dehydrator? ›
Alcohol can be used as a nail dehydrator, yes. Preparation is a crucial part of nail manicure at home to get the best results. Isopropyl alcohol, or rubbing alcohol, is included in most nail dehydrators.
What is a prep dehydrator? ›
Removes Moisture and oil from the surface of the natural nail. Prepare the nail for the application of nail enhancement products. To use before Primer.
Do you use dehydrator before acrylic nails? ›
Nail dehydrator is a very important step in the application of acrylic nails as it pH balances the nail plate in preparation of receiving a nail enhancement product, in this instance, acrylic. Primer is a very Important step in acrylic application.