Loading…
ASME B16.47 Large Diameter Steel Flange Standard
In November of 1980, Subcommittee C of the American Society of Mechanical Engineers (ASME) B16 began work on the B16.47 Large Diameter Steel Flange Standard to standardize dimensions, tolerances, markings, and materials for Nominal Pipe Sizes 26” to 60”. Prior to this in July of 1952, MSS-SP44 covered 12” thru 60” Nominal Pipe Sizes (NPS), in 150# to 900# pressure ratings in raised face (RF), flat faced (FF),and ring type joint (RTJ) facing. The initial draft was developed in December of 1982, and went thru several adjustments before being approved and published in 1990 as Series A (Duplicating MSS-SP44 specification) and Series B (Replacing API-605 specification). Both the Series A and Series B are a weld neck and blind specifications only. Series A and Series B are manufactured in Carbon, Stainless and other alloy materials.
What’s the difference between ASME B16.47 Series A vs Series B?
Physical attributes for Series A flanges are typically thicker in flange thickness, heavier in weight, and have large diameter bolt holes in comparison to Series B in the same size and pressure rating. Series B flanges generally have more bolt holes than are in smaller in diameter, generating the need for smaller bolting hardware. It is important to note Series A and Series B flanges are non-compatible in bolting between each other.
Application of Series A flanges are normally used for industrial connectors such as valves, pumps and pipeline separations. Series B flanges are commonly used in pipeline application.
Price points for Series A flanges tend to be more expensive due to increased steel weight, whereas Series B consumes less steel weight therefore reducing cost.
In Conclusion: ASME B 16.47 Series A and Series B flanges are for large diameter applications for piping projects from 26” thru 60”. Both Series can be manufactured using carbon, stainless, and other alloy materials. Series A is a carryover from MSS SP44 and Series B from API 605, thus creating a more uniform standardization for the industry thru ASME B16.47.
Please contactCoastal Flangewith any questions or to receive a bid winning quote tailored to your needs.
Phone: 713-937-3333
Email:Sales@coastalflange.com
FAQs
47 Series A vs Series B? Physical attributes for Series A flanges are typically thicker in flange thickness, heavier in weight, and have large diameter bolt holes in comparison to Series B in the same size and pressure rating.
What is the difference between B16 47 Series A and B? ›
ASME B16 47 Series A flanges are thicker, heavier, and stronger than their Series B counterparts. They also can often handle more external loading than Series B. Series A flanges tend to be more costly than Series B flanges.
What is the difference between ASME A and ASME B? ›
Within ASME B16. 47 there are series A and series B flanges, with the noticeable differences in most cases being the bolt size and/or bolt quantity. Series A flanges typically have fewer, larger diameter bolts while Series B flanges typically have more, smaller diameter bolts.
What are Series B flanges? ›
Series B flanges, on the other hand, are lighter, less expensive, and require more but smaller fasteners. Series A includes weld neck, blind, and ring type joint (RTJ) flanges, while Series B primarily focuses on weld neck and blind flanges.
What material is ASME B16 47 Series B? ›
The ASME B16. 47 Class 75 Series B Welding Neck flange is of the lowest pressure rating and it can come in copper, brass, high alloys and other materials depending on the applications' mechanical, physical and chemical requirements.
What is the ASME B16-47 flange? ›
47 Large Diameter Steel Flange Standard. In November of 1980, Subcommittee C of the American Society of Mechanical Engineers (ASME) B16 began work on the B16. 47 Large Diameter Steel Flange Standard to standardize dimensions, tolerances, markings, and materials for Nominal Pipe Sizes 26” to 60”.
What is the difference between Grade A and B bolts? ›
Grade-A bolts are the preferred style for most applications. Grade-B bolts have looser tolerances and can be manufactured in a cold or hot-forging process.
Are ASME and ANSI flanges the same? ›
The ANSI and ASME variants stand as stalwarts, each with unique characteristics and advantages. While ANSI flanges epitomize versatility and compatibility, ASME flanges embody precision engineering and performance excellence.
What is the difference between ASTM A and ASTM B? ›
ASTM A standards are related to ferrous metals, while ASTM B standards are related to non-ferrous metals such as aluminum and copper.
What is ASME B Series? ›
Today, ASME offers a series of 32 different B16 Standards that cover pressure-temperature ratings, materials, dimensions, tolerances, markings and the testing of the following: valves, flanges, fittings and gaskets.
The ASME B16 Standardization of Valves Flanges, Fittings and Gaskets Committee, which operates under ASME's Board on Pressure Technology Codes and Standards is responsible for standards covering valves, flanges, pipe fittings, gaskets and valve actuators for use in pressure services.
What is the pressure rating for ASME B16 47? ›
Specification : | ASME B16.47 Flange |
---|
Machining Equipment: | Pushing Machine, Bending machine, Electric bevelling machine, Press machine, Sand-blasting machine etc |
Production Process: | Forged, Heat Treated and Machined |
Pressure Rating Table: | Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS |
6 more rows
What are the two main standards of flanges? ›
The flanges are used to connect ducts, pipes or equipment and come in different sizes and shapes. In this article, we look at flanges in the ASTM and DIN standards, which are the most common standards.
What is the tolerance of ASME B16 47? ›
Dimensions and tolerances
Item | Condition | Tolerance |
---|
X | all sizes | ±3.2 |
T | T ≤ 25 mm | +3.0 -0.0 |
25 mm < T ≤ 50 mm | +5.0 -0.0 |
50 mm < T ≤ 75 mm | +8.0 -0.0 |
9 more rowsSep 2, 2019
What is the difference between B16 5 and B16 47? ›
However, the standard ASME B16 5 (ANSI B16 5) only covers size up to 24 inches. For bigger sizes, ASME B16. 47 standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, and testing for pipe flanges in sizes NPS 26 through NPS 60 and in ratings Classes 75, 150, 300, 400, 600, and 900.
What are the classes of ASME B16? ›
B16. 5 allows for a class of 150, class 300, class 400, class 600, class 900, class 1500, and finally class 2500, which is available up to 12-inch. ASME B16. 5 is the standard for pipe flanges from half inch to 24-inch nominal pipe size.
What is the difference between Type A and B gaskets? ›
Series A spiral wound gaskets are more commonly used and can withstand more external pressure, while Series B spiral wound gaskets are typically found in non-critical applications. For both Series A and Series B spiral wound gaskets, the dimensions are different and must match the flanges they are being used to seal.
What is the difference between steel grade A and B? ›
Different steel grades correspond to different tensile and yield strengths, and carbon content is also different. ASTM A500 grade A steel has a tensile strength of 400MPa and a yield strength of 290MPa. Grade B steel has a tensile strength and yield strength of 400MPa and 310MPa respectively.
What does the ASME B stand for? ›
The ASME Boiler & Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that regulates the design and construction of boilers and pressure vessels. The document is written and maintained by volunteers chosen for their technical expertise .
What is the difference between A53 Grade B and A500 Grade B pipe? ›
A500 pipe is normally better for the majority of your structural steel construction projects because it has a higher yield strength than the A53 type pipe specification. This means that the strength-to-weight ratio is better than A53 grade pipe.