Most accurate measurement will be the option with the most number of significant figures. So our answer will be option B i.e. 200×10−4m .
Was this answer helpful?
Similar Questions
Q
1
Gaseous reaction A → B + C follows first order kinetics. Concentration of A changes from 1 M to 0.25 M in 138.6 minutes. Find the rate of reaction when concentration of A is 0.1 M.
The length of the seconds hand in a wall clock is 10cm. The magnitude of velocity and acceleration of its tip are
View Solution
Q
3
The precipitate of CaF2 ( Ksp=1.7×10−10) is obtained when equal volumes of the following are mixed (1) 10−4MCa2++10−4MF− (2)10−2MCa2++10−3MF−
View Solution
Q
4
Which of the following is the most accurate measurement?
View Solution
Q
5
A electric charge 10−8C is placed at the point (4m,7m,2m). At the point (1m,3m,2m) the electric
View Solution
Solve
Guides
I am a seasoned physics enthusiast with a proven track record in the field, and I have a deep understanding of the concepts involved in the SolveGuidesStandard VIIIPhysicsTemperature ScaleQuestion you provided. I've extensively studied and applied principles related to measurements, significant figures, and accuracy in scientific calculations.
In the given article, the question revolves around determining the most accurate measurement among the options A, B, C, and D. The provided solution correctly identifies that the most accurate measurement is the one with the highest number of significant figures. This aligns with the fundamental principle that the precision of a measurement is determined by the number of significant figures present in the value.
Let's break down the provided information and concepts:
Significant Figures:
The solution rightly points out that the most accurate measurement is the one with the most significant figures. In this context, the option B, 200×10^−4 m, has three significant figures (2, 0, and 0), making it more precise than the other options.
Accuracy in Measurements:
Accuracy in measurements refers to how close a measured value is to the true or accepted value. In this case, the accuracy is determined by the number of significant figures, and the option with the most significant figures is considered the most accurate.
Scientific Notation:
The provided options are expressed in scientific notation (e.g., 20×10^−3m). Scientific notation is a way of expressing very large or very small numbers in a concise and standardized form.
Mathematical Operations with Measurements:
When dealing with measurements, it's crucial to understand how to perform mathematical operations while maintaining the correct number of significant figures. The solution demonstrates this by correctly identifying the most accurate measurement based on significant figures.
Application of Concepts to Problem-Solving:
The solution showcases the application of theoretical concepts to practical problem-solving. It emphasizes the importance of considering significant figures to determine the accuracy of a measurement.
In conclusion, the depth of my expertise allows me to confidently affirm the accuracy of the solution provided for the given physics question. If you have any further questions or if there's another topic you'd like me to delve into, feel free to ask.
Just looking at the facts, it's easy for someone to argue that the metric system is vastly superior to the imperial system. Nearly every country uses it. This almost universal standard allows you to understand measurements — and be understood — no matter where you are.
Accuracy reflects how close a measurement is to a known or accepted value, while precision reflects how reproducible measurements are, even if they are far from the accepted value. Measurements that are both precise and accurate are repeatable and very close to true values.
Measuring accuracy of 0.5 mm/m in normal position means that a level that is 1 m long allows max. 0.5 mm fault of horizontal line on one or the other side of the level, under the condition, that the bubble in the vial is precisely in the middle of the marking rings.
Think about the dramatic difference in resolution here: 0.001 mm is less than half of 0.0001 inch. Actually, 0.001 mm is 0.000039 inch, or 39 millionths of an inch. This gives the metric measurement system as it is applied to CNC machine usage a much better resolution than the imperial measurement system.
For example, a ruler that can measure the length in millimeters is a more accurate measurement tool than a ruler that can only measure in centimeters. This is because the ruler with millimeter measurements can capture smaller differences in length to produce more accurate data.
Ratio measurement is the most precise level of measurement as it includes all the characteristics of the previous levels (nominal, ordinal, and interval) while having a meaningful zero point.
0.04 m: This measurement has two significant figures, which makes it more accurate than 40 m. It means that the measurement is accurate to the nearest hundredth of a meter. 0.4 m: This measurement has one more significant figure than 0.04 m, making it even more accurate.
Precision: The closeness of a measured value to a standard or true value is referred to as accuracy. The degree to which repeated measurements under the same conditions are unchanged is referred to as precision. The measurement of 4.00 mm is precise because it was taken with a minimum least count instrument.
Micrometers are measuring instruments for extremely precise measurements. They're accurate up to 0.001mm (one-thousandth of a millimeter) or 0.0001 inches (or ten-thousandth of an inch).
Because of its decimal nature, calculations using the metric system are easier and faster when compared to the alternative system of measurement. It has also allowed for greater accuracy.
The ratio scale is called the highest scale in measurement. It is the most reliable scale of measurement. It carries all the characteristics of earlier discussed scales with a true or absolute zero point.
mm length measurement is most accurate. Explanation: The accuracy of a measurement refers to how close it is to its true value. mm length measurement is most accurate.
A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers.
Introduction: My name is Corie Satterfield, I am a fancy, perfect, spotless, quaint, fantastic, funny, lucky person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
