Which Insulated Bottle is the Best?
Insulated water bottles have been around for a long time, but in the last decade or so their popularity skyrocketed with brands like Hydro Flask and YETI. There’s no doubt that the dual-wall insulation technology in these bottles is a wonderful quality of life improvement compared to non-insulated bottles, especially if you live in a hot region.
But if you look on Amazon today, you can find dozens if not hundreds of brands selling similar insulated bottles. So many people ask, which water bottle has the best insulation?
We tested 10 popular water bottles to see how well they hold ice.
The Best Insulated Bottle - A Video Review
If you'd rather watch the results, then check out our YouTube video below!
The Contenders
We primarily focused on 32-ounce bottles because that size tends tend to be very popular, but we did use some other bottle sizes for certain brands based on what was available. We also included a couple non-insulated bottles as a baseline, a Stanley classic thermos to see how the older style compares, and a triple-wall bottle because we hadn’t tested one before and we were curious if it’s the next best thing.
- Nalgene with the Classic Lid (32oz)
- Klean Kanteen Classic, Non-Insulated, Loop Lid (32oz)
- Hydro Flask with a Flex Straw Lid (32oz)
- ThermoFlask with a Chug Lid (32oz)
- Takeya with a Chug Lid (32oz)
- Iron Flask with a Straw Lid (40oz)
- Klean Kanteen’s TKWide with a Chug Lid (32oz)
- YETI Rambler with Classic Lid (36oz)
- Luxe with Chug Lid (22oz)
- Stanley Original (1L / 34oz)
(click an image below to see the bottle on Amazon)
The Test
Because the main purpose of an insulated water bottle is to maintain a temperature for longer periods throughout the day, we measured the weight of ice before and after the test as our main metric. We purchased an ice mold that creates larger sticks to limit the effect that surface area variations in different pieces of ice might have on the melting rate. Then we added one ice stick to each bottle and no water. After four hours, we poured the contents of each bottle into a strainer, then the remaining ice was dumped onto a scale. By comparing the weights of each ice stick before and after, we were able to get an idea of which bottle keeps ice the best. We then repeated this test three times and calculated the cumulative results.
The Ice Mold This is the ice mold we used to create the larger sticks of ice. In general, less surface area leads to slower melting, so the larger the ice cubes you use, the longer your ice should last! |
Keep in mind that this experiment was intended just to give an idea if there are any major variations in insulation effectiveness. In an ideal experiment, we would have used a more accurate scale, used similar lids on all of the bottles, measured out the water into each ice mold to ensure the same volumes of ice were made, and used the same volume bottles across the board.
With the disclaimers out of the way, here are the results!
The Results
The cumulative results are summarized in the table below. You can see the percentage of ice that melted in the fourth column. A few things jumped out at us.
The Luxe and Stanley Original bottles are in a league of their own with 36% ice loss. One factor to keep in mind with the Luxe bottle is that it’s only 22 ounces, and the smaller volume of air likely made the result look better than it really was. We also haven’t tested or used this bottle at all other than with this insulation test, so we’re not quite ready to recommend it yet. Regardless, this initial test of the triple-wall insulation showed promise, and this type of bottle is worth looking into more. The Stanley result was interesting too, given that this type of bottle has been around for a long time and is basically the OG of insulated bottles.
After that, we have the Klean Kanteen TKWide, the YETI, Takeya, and Hydro Flask with between 49 and 52% ice loss. These results are very close and are certainly within the range of potential error, so there’s not much difference here.
Next is the Iron Flask at 55% ice loss. But keep in mind that we only had a 40oz Iron Flask to test, and the larger volume of air likely made the ice melt faster. Based on this consideration, we feel comfortable assuming that the Iron Flask’s insulation is essentially the same as the previous group.
ThermoFlask was the one outlier of the dual-wall insulation bottles. At 59% ice loss, ThermoFlask seemed to consistently test worse than the other similar bottles.
And the Nalgene and Klean Kanteen classic had the worst results, but given that these are single-wall bottles and not insulated, this result was to be expected. We mostly just included them in the test as a baseline because we could see when the ice had finished melting in the Nalgene, and we were curious if the single-wall stainless-steel design would do any better.
Conclusions
When we take a step back to think about these results overall, we can reach a few conclusions.
- Triple-Wall - This was our first test of a triple-wall insulated bottle, but these might be the real deal and are worth testing more.
- The "OG" Thermos - While this type of Stanley bottle is not as convenient to drink from for every-day hydration, the Stanley Original is great at what it was primarily designed for. This is the best option to keep your drink hot while you’re camping or watching a sporting event. Just pour the drink from the Stanley into the cap or another container to drink from.
- Dual-Walls - For most people, any of the dual-wall insulated bottles from this test will be good enough to get them through the day, particularly when considering that you’ll probably use more ice than we did. Our results showed some brands are slightly better than others, and in particular the ThermoFlask seemed to be the worst of the group. But in our opinion there’s not enough of a difference to base a buying decision entirely on the insulation. Instead, take other factors like the price, color options, and lid types into account to get a bottle that’s best for you.
Buying a large bottle? Keep us in mind!
Check out our Amazon store for fun and helpful accessories, like fruit infusers, cup holder adapters, and carrying slings.