Have you experienced “Stuttering” or “Hissing” or “Static “noise in your Bluetooth headphones? Have you encountered random audio cuts even when your Mobile Device is nearby? Well, I have, and I find it extremely annoying.
These “Bluetooth Stuttering” issues” are most likely caused by some sort of signal interference.
So, what are the possible Solutionsand how can you avoid it?We’ve got a few methods for you to try, and we’ll explain them in more details
below.
1. Unpair the Devices and Reconnect them again.2. Move away from the Source of Interference or Move the Source of Interference away.3. Check and see if the Device has Bluetooth Connectivity Issues.4. Bluetooth Version Upgrade?5. Extend your Bluetooth Range?
Method 1: Unpair the Devices and Reconnect them Again.
This is probably what most people would try in this situation. This method should be able to fix all the minor connectivity issues and stabilize the connection.
- Turn off your Headphones/Speaker and Restart it.
- If the step above didn’t fix it, try Factory Resetting your Headphones/Speaker and pair them up with your device again.
Method 2: Move away from the Source of Interference.
Look around. Here are some possible sources of interference.
- Physical: Pillar, wall, your Roommate… basically anything physical. The worst “physical interference source” is metal obstacles… it can be a metal board or simply the fixtures in your concrete walls.
- Non-Physical: WiFi Router, TV Streaming Device (Roku, Apple TV etc.), or another Bluetooth device.
Once you’ve located a source of interference, either move them away or move away from them.
Please note that we’ve also seen cases where wireless signals from outside the apartment also managed to negatively affect the Bluetooth signal… causing the Bluetooth Headphones Stuttering issue, so please do look around.
Method 3: Check and See if the Device has Bluetooth Connectivity Issues.
In other words… check and see if it’s your Headphone/Speaker… or even your phone that’s the source of the issue. Maybe its Bluetooth antenna is damaged, or maybe you’ve just received a faulty product.
The easiest way to check is simple connecting it to something else and see if the same issue persists. You may also try going to an open area such as a park or a parking lot and test it out.
Cross check thoroughly so you can correctly pinpoint the source of the issue.
If it is your device that’s faulty… well, you know what to do.If not, you’ll have to check around again for the source of interference… otherwise the issue will persist even if you purchase a new device.
Method 4: Upgrade the Bluetooth Version?
Of course, the newer the Bluetooth version, the better/stabler the connection should be. As of right now (February 2021,) the newest Bluetooth version is Bluetooth 5.2. If your device’s Bluetooth version is below 4.2, please consider upgrading to a device that’s at least Bluetooth 5.0.Newer version of Bluetooth doesn’t guarantee perfect connection, but it should greatly reduce the chance/frequency of Bluetooth breaking up.Examples of Bluetooth 5.0+ Headphones…
Method 5: Extend your Bluetooth Range?
This method only applies IF you have range requirements; if you’re just using the device on your mobile device, you most likely won’t need this.On the other hand, if you’re going to be moving around the house while the “audio source” stays put (such as a conference call or watching TV with Bluetooth Headphones), you should consider using a Bluetooth “Extender” or a Bluetooth Transmitter Adapter.A good Bluetooth Transmitter usually comes with Class 1 Bluetooth (Class 1 has better range than Class 2 but consumes more power) and can give you better range than direct connections.Better range = Stabler Connections = Less chance of Bluetooth Stuttering.Examples of Long-Range Bluetooth Transmitters:
Bluetooth Stuttering, Bad Bluetooth Range, Bluetooth Audio Cuts - 99% of these issues are caused by Interference issues. Find the Source of Interference = Fix the Issue.
Sometimes it takes a while to find it so please be patient and don't express your anger on the devices... otherwise you'll really have to buy a new one.
Still got questions? Feel free to leave them in the comment section below, we’ll get back to you within 24 hours. You may also contact us at support@avantree.com.
FAQs
Does the Bluetooth connection between your headphones and smartphone (or another device) sometimes cut out, or do you experience sound cuts? Let's check out the most common causes of Bluetooth connection drops. The four primary causes are distance, interference, obstructions, or battery charge.
How to fix an unstable Bluetooth connection? ›
Method 1: Unpair the Devices and Reconnect them Again.
- Turn off your Headphones/Speaker and Restart it.
- If the step above didn't fix it, try Factory Resetting your Headphones/Speaker and pair them up with your device again.
Several factors can interfere with the Bluetooth signal, including Wi-Fi networks, microwave ovens, walls, other Bluetooth devices, fluorescent lighting, and even cross-body interference. These external factors can weaken or disrupt the signal, causing the audio to cut out or skip.
Why does my Bluetooth connection keep cutting out? ›
The six common causes of Bluetooth headphones cutting out are: weak Bluetooth signal, interference from other wireless devices, body blocking the signal, low battery power, software and device compatibility issues, and damaged Bluetooth antenna.
Why is my Bluetooth suddenly choppy? ›
The number one cause of stuttering is signal. Some Bluetooth devices are better than others and going too far out of range, or passing through obstructions like a wall or even the human body, greatly affects the signal. Try putting the Bluetooth device right next to the phone or device that is transmitting the sound.
How to strengthen Bluetooth connection? ›
To increase the range of Bluetooth, keep your devices as close to each other as possible. The closer the devices are, the stronger the signal will be, and the better the range will be. Interference is one of the biggest factors that can affect the range of Bluetooth.
How do I fix Bluetooth connection problems? ›
Fix Bluetooth problems on Android
- Step 1: Check Bluetooth basics. Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off. Confirm that your devices are paired and connected. ...
- Step 2: Troubleshoot by problem type. Can't pair with car. Step 1: Clear devices from your phone's memory.
There's Interference with the Bluetooth Signal
To fix Bluetooth signal interference, you can try turning off the device you're trying to connect your headphones to and then turning it back on again. This might help get rid of any interference that's causing your signal to cut out.
What can interrupt Bluetooth connection? ›
What do you do when your Bluetooth devices are not pairing?
- Microwave ovens.
- Cabling and connectors for cable and satellite service.
- Poorly shielded power lines in the wall.
- 4 GHz cordless telephones.
- Wireless RF security video camera.
- Wireless Wi-Fi speakers.
I also recommend heading to Settings > Apps > Tap the 3 lines to the right of 'Your Apps' > Show System Apps > OK > Bluetooth > Storage > Clear Cache > Clear Data. You should also make sure that your device is up to date by heading to Settings > Software Update > Download and Install.
The closer the devices are, the better the connection will be. If you can, avoid putting physical blockages between the devices, too. You can still pop your phone in your pocket and use your earbuds, but if you start noticing Bluetooth audio stutters, a simple change of your phone's position could fix your issues.
Why does my Bluetooth keep cracking? ›
Minimizing the presence of interfering devices or changing the wireless frequency can mitigate these issues. Also, keeping headphones away from paired devices can further reduce the chances of experiencing Bluetooth headphones crackling.
Why is my Bluetooth misbehaving? ›
Restart Both Phones
This is the fastest way to get rid of any temporary bug in your phone that is hindering the Bluetooth connection. Once you have rebooted the device, turn on the Bluetooth from the Control Center or Settings. Try to pair the devices again. If the issue persists, jump to the next solution.
How do I make my Bluetooth stable? ›
The first thing you should do is check your Bluetooth settings on your device and make sure that Bluetooth is turned on, that your device is discoverable, and that you have paired with the correct device. You should also check the battery level of your Bluetooth device and make sure it is fully charged or plugged in.
Why is my Bluetooth fluctuating? ›
If there are obstructions between the receiver and your BLUETOOTH device, remove these or move the receiver and/or device avoid them. If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away.
Why is Bluetooth inconsistent? ›
Many Wi-Fi routers transmit on multiple channels simultaneously, and if there are excessive Wi-Fi signals in close proximity taking up most of the spectrum, your Bluetooth devices may not have any open spectrum to frequency hop to. This is a common cause of Bluetooth interference.
