What is the best bridge from Polygon to ETH?

Wormhole . Known as the best Polygon to ETH bridge, Wormhole platform is not a cross-chain bridge itself. It is a messaging protocol that supports development and operations of on-chain bridge systems between heterogeneous decentralized networks.

What is the cheapest way to bridge a Polygon?

The Polygon network has two bridges — the Plasma Bridge and the proof-of-stake (PoS) Bridge — to validate transactions. The cheapest way to bridge Ether (ETH) to Polygon is via the PoS Bridge .

How long does it take to bridge to a Polygon?

How Long Does it Take to Bridge Tokens From ETH to Polygon? Bridging times can vary on various factors including the bridge used, the blockchains selected, gas fees, and congestion. Generally when bridging tokens from Ethereum to Polygon with ChainPort, the process takes at most a minute or two .

Can I bridge from Polygon to base?

Bridge Polygon to BASE Now bridge MATIC or other tokens from Polygon network to BASE network with a single click . With Obvious smart contract wallet, you can pay gas fees in a token of your choice while bridging your tokens and execute swaps with just a single click.

How long does Polygon PoS checkpoint take?

Every checkpoint takes about 3 hours . If the validator you allocate your POL tokens to falls short, both their rewards and your staking rewards will be reduced. If the violations persist, the validator could be ejected from the Polygon network, preventing you from earning further rewards.

What happens when you bridge Ethereum to Polygon?

You can use a bridge to transfer some ETH, USDC, or other tokens from Ethereum to Polygon — retaining their value — and start to use them with dapps on Polygon.

What is the cheapest way to transfer ETH to Polygon?

The cheapest way to transfer ETH to Polygon can vary based on network conditions and the bridge used . It's advisable to compare the gas fees and additional charges of different bridges at the time of transfer. Some popular bridges, like the official Polygon Bridge or Hop Protocol, might offer competitive rates.

Is it better to use Polygon or Ethereum?

Polygon can validate transactions quicker than Ethereum ; handling up to 700 transactions per second compared to Ethereum's average of 10. It charges much lower gas fees as a result; around $0.01 per trade compared to the average fee of $14 on Ethereum for a trade on Uniswap v3 in 2022.

Can you bridge from Polygon to optimism?

Seamlessly bridge Polygon from mainnet to Optimism within Obvious app with three-simple steps . Click on swap, select source & destinations chain and confirm. Voila!

What does bridge to Polygon mean?

The Polygon Bridge is a solution for achieving interoperability between blockchain networks . It specifically facilitates the transfer of tokens from the Polygon network, a framework for Ethereum-supported blockchain networks, to the Ethereum mainnet.

How do I withdraw from a Polygon?

Add the address you want to withdraw to as well as the amount of tokens you want to withdraw and click Continue . Your Polygon address shares the same address as your Ethereum address. You can withdraw your assets to any address, but by using our withdrawal method, your assets will appear on the Polygon network.

How To Bridge to Polygon | CoinMarketCap (2024)

Learn how to bridge tokens from Ethereum, BNB Chain, Arbitrum, Optimism and more to Polygon PoS and Polygon ZkEVM.

What Is Polygon?

Polygon is an Ethereum scaling platform that aims to create an ecosystem compatible with EVM. It offers advantages like low fees, EVM compatibility and numerous established decentralized applications (DApps) in the ecosystem.

Source: https://coinmarketcap.com/chain-ranking/

The total value locked (TVL) on Polygon is slightly over $1 billion, making it the fifth largest blockchain network by TVL, and 1.42% of the TVL across all chains.

Source: https://coinmarketcap.com/chain-ranking/

In July 2023, Polygon announced a rebrand as part of its “Polygon 2.0” roadmap, which will see the MATIC token renamed POL. This comes as the network is transitioning from a proof-of-stake (PoS) scaling solution to a zero-knowledge layer-two rollup on Ethereum.

With 477 DApps already deployed on Polygon, let’s take a look at how you can bridge funds into Polygon to interact with the ecosystem.

What You Need To Bridge to Polygon

Before you bridge, you need to have the following things:

1. A Metamask or other type of hot wallet.

Learn how to connect your Metamask to the Polygon network.

2. Some ETH and MATIC tokens: You need some ETH to pay for the gas fees when bridging assets from Ethereum to Polygon, and some MATIC to pay for the gas fees when using DApps on Polygon.

Learn where to buy tokens with the new Coin Detail Page.

How To Bridge Tokens From Ethereum to Polygon PoS Via the PoS Bridge?

The PoS Bridge is a smart contract that allows you to transfer your ETH or ERC-20 tokens from Ethereum to Polygon and vice versa. To use the PoS Bridge, you need to follow these steps:

1. Head to the Polygon web wallet and click on native bridge.

2. Connect your MetaMask wallet.

A pop-up will open, prompting you to connect your wallet to the Polygon web wallet.

3. Approve the Polygon web wallet smart contract.

You will be asked to sign a transaction if it is your first time interacting with Polygon. You will not see this message if you have interacted with the web wallet before.

4. Select the asset and amount you want to bridge.

Choose the asset you want to bridge from Ethereum to Polygon and click on Transfer.

5. Approve the transaction and pay the gas fee.

You need to approve the transaction by clicking through several windows of confirmation. Click on “Continue” in each window.

6. Sign the transaction in your MetaMask interface.

How To Bridge Tokens Back From Polygon to Ethereum Via the PoS Bridge?

Bridging from Polygon back to Ethereum follows almost the same process.

1. Open the Polygon web wallet and connect your MetaMask.

2. Click on Withdraw and select the asset and amount you want to bridge.

3. Approve the transaction and pay the gas fee.

When bridging out of Polygon, you also need to approve the transaction. Click on Continue in each window.

4. Sign the transaction in your MetaMask interface.

Sign the transaction in the Metamask pop-up. After that, the assets are bridged and you have to wait for a few hours to receive them on Ethereum.

6. Claim your withdrawal.

When your bridged assets arrive on Ethereum, click on Continue to claim them in your Metamask.

How To Bridge Tokens to Polygon PoS With Third-Party Bridges?

If you don’t want to wait too long for your assets to get bridged using the native Polygon bridge, you can use faster third-party bridges. These platforms allow you to bridge your assets from other chains including Ethereum, Avalanche, BNB Chain, Optimism, Arbitrum and more to Polygon thanks to liquidity pools on both chains.

1. Select Faster Bridges in the web wallet.

2. Connect your wallet and select a third-party bridge from the list which supports the ERC-20 token you want to bridge.

Different bridges support different assets and have different fees. You can choose a bridge depending on the asset you want to bridge. All third-party bridges support deposits and withdrawals from the Polygon network.

How To Bridge Tokens to Polygon ZkEVM With the Native Bridge?

Polygon ZkEVM is a ZK-rollup scaling solution developed and recently launched by Polygon. You can learn about Polygon ZkEVM here. It is currently in mainnet beta, so if you want to bridge to Polygon ZkEVM to interact with the ecosystem, here’s how:

1. In the web wallet, select the ZkEVM tab and click on “Native Bridge.”

2. Connect your wallet and select the asset and amount you want to bridge.

When you have chosen the asset you want to bridge, you will be prompted to sign a Metamask transaction.

3. Check the alert and click “Start Bridging.” Bridging to ZkEVM is instantaneous.

Currently only bridging to the network is enabled.

How To Bridge Tokens to Polygon ZkEVM With Third Party Bridges?

You can also use third-party bridges to bridge to and from ZkEVM. However, be aware that Polygon ZkEVM is still in beta and bridging using third-party products carries risks.

1. In the web wallet, select the ZkEVM tab and click on “Third-Party Bridges.”

2. Connect your wallet and select the third-party bridge you want to use.

When you have chosen the bridge, you will be directed to the external platform to conduct the bridge transaction.

Conclusion

Bridging to and from Polygon is simple and does not take a lot of time. If you want to reduce waiting times even further, you can use faster third-party bridges to enjoy quicker access to your crypto assets on Polygon.

This article contains links to third-party websites or other content for information purposes only (“Third-Party Sites”). The Third-Party Sites are not under the control of CoinMarketCap, and CoinMarketCap is not responsible for the content of any Third-Party Site, including without limitation any link contained in a Third-Party Site, or any changes or updates to a Third-Party Site. CoinMarketCap is providing these links to you only as a convenience, and the inclusion of any link does not imply endorsem*nt, approval or recommendation by CoinMarketCap of the site or any association with its operators.This article is intended to be used and must be used for informational purposes only. It is important to do your own research and analysis before making any material decisions related to any of the products or services described. This article is not intended as, and shall not be construed as, financial advice. The views and opinions expressed in this article are the author’s [company’s] own and do not necessarily reflect those of CoinMarketCap.