External Interfaces/API |
Specify the number of bits used to indicate the end of a byte
Description
You can configure StopBits
to be 1
, 1.5
, or 2
. If StopBits
is 1
, one stop bit is used to indicate the end of data transmission. If StopBits
is 2
, two stop bits are used to indicate the end of data transmission. If StopBits
is 1.5
, the stop bit is transferred for 150% of the normal time used to transfer one bit.
Note Both the computer and the peripheral device must be configured to transmit the same the number of stop bits.
In addition to the stop bits, the serial data format consists of a start bit, between five and eight data bits, and possibly a parity bit. You specify the number of data bits with the DataBits
property, and the type of parity checking with the Parity
property.
Characteristics
Read only | Never |
Data type | Double |
Values
Properties
Status | Tag |