14Feb
The do’s and don’ts of re-using pipette tips
New users of micropipettes are taught “Always use a new tip!” However, always using a new pipette tip creates a lot of plastic waste. Surely, there must be a better way.
Savvy lab practitioners know that a new tip isn’t always necessary. So here we suggest some basic rules for when you definitely need a new tip, and then some times when it may be OK to reuse one.
Times it is not OK to re-use a tip: To know when it’s ok to reuse, first it helps to know when not to reuse a tip.
- Be extra cautious around DNA, especially if PCR is involved. DNA contamination can be especially problematic and can result in multiple rounds of decontamination and throwing out reagents. Because PCR amplifies DNA, even the most minute amounts of DNA contamination can turn into big problems. In short, extremely small amounts of contaminating DNA can be disastrous.
- If a tip comes in contact with more than one reagent, throw it out. When micropipetting, you often want to add your reagent directly to other reagents already in the tube. When you do this, your tip will come in contact with reagents that could cause cross-contamination; throw it out.
- Don’t ever put a used tip back into a stock reagent. If you are using a reagent that will go back on the shelf or in the freezer to be used again, even if contamination is extremely unlikely, use a new tip every time. If stock reagents become contaminated, they have the potential to contaminate many more experiments down the line.
- When in doubt, throw it out. If you are ever questioning whether a new tip is necessary, use the new tip. Using a few extra pipette tips is always better than ruining an entire experiment with contamination.
Times it may be OK to reuse a tip:There are two times when I regularly reuse tips in the molecular biology lab.
- Loading gels. If the last step of your experiment is to run a gel, you can generally use the same tip to load multiple samples on the gel. Simply rinse your tip by pipetting up and down in the running buffer between samples. This clearly doesn’t remove every molecule of DNA from the tip, but if a few molecules of contaminating DNA end up in the wrong well, it won’t be enough to see on the gel. And you’re just going to throw out any remaining sample anyway. Important note: if you are running a gel and plan to use some of the remaining reactions for sequencing, or plan to excise bands from your gel for cloning or other downstream procedures, don’t risk contamination; use a new tip for each sample.
- The first reagent in a tube. If you’re setting up multiple reactions with many of the same reagents, order the reagents so that whatever you add first is the same for each tube. For example, if you’re setting up eight reactions in preparation for PCR, and all the reactions have the same primer and PCR master mix, mix enough master mix and primer for all 8 reactions (plus some extra) in a separate tube first. Then you can use the same tip to add your primer/master mix solution to your eight different PCR tubes. In this example, you can reduce the use of 16 pipette tips down to just 3! Then, use a new tip each time that you add a DNA sample to your different reactions.
As you become more familiar with lab procedures, it becomes easier to spot when a new tip is absolutely necessary and when a tip can be reused without leading to contamination. Just always remember that while a good bench scientist may know the times it’s ok to reuse a tip, they also know that it’s better to waste a few tips than to waste an entire experiment.
Contributed by miniPCR bio curriculum director Bruce Bryan
Related Posts
13Jun
How do loading dyes differ from DNA stains?
A common point of confusion for students learning DNA gel electrophoresis is understanding the difference between the reagents that aid... read more
28Dec
Choosing a DNA stain for classroom use
Have you ever wondered which DNA stain is best for your gel electrophoresis needs? If so, this blog post is... read more
02Dec
Debunking the 4 degree myth: PCR can be left at room temperature overnight
(. . . and much longer!)Myth: PCR product needs to be refrigerated if left overnight in the thermal cyclerTruth #1:... read more
13Jun
How to Pour an Agarose Gel
If you’re looking to run an electrophoresis experiment, you'll have to begin by pouring an agarose gel. Here, we share... read more
03Aug
How to connect to your miniPCR with your device
Everyone’s favorite portable thermal cycler, the miniPCR®, allows you to program and run your PCR experiment on your own device.... read more
28Apr
Choosing the right voltage for your gel electrophoresis run
Some gel electrophoresis systems allow you to set the voltage for your gel run. Here, we will discuss how to... read more
20Jan
How to reuse and recycle agarose gels
Barely-used pipette tips. Untouched gels. Biology experiments can be expensive and also create a lot of waste. Today we will... read more
27Jun
What are PCR primers?
This blog post is the first in 4-part series on PCR primers. Elsewhere on our blog, find posts on designing... read more
12Jul
How to design PCR primers
This blog post is the second in 4-part series on PCR primers. Elsewhere on our blog, you can find posts... read more
12May
DNA vs. protein gel electrophoresis: What’s the difference?
…and how to use a DNA gel setup to run proteinsRed and green fluorescent proteins that have been separated on... read more
I'm an expert in molecular biology and laboratory techniques, having extensive knowledge in the field. My expertise spans various topics, including pipetting, gel electrophoresis, PCR, and DNA handling. I'll provide information related to the concepts used in the article you mentioned.
In the article "The do’s and don’ts of re-using pipette tips," the author discusses the considerations for reusing pipette tips to minimize plastic waste in laboratory settings. Here are the key concepts covered:
-
When not to reuse a pipette tip:
- DNA Contamination: Caution is advised when dealing with DNA, especially in PCR. Even minute amounts of DNA contamination can lead to significant issues.
- Contact with Multiple Reagents: If a tip comes in contact with more than one reagent, it is recommended to discard it to prevent cross-contamination.
- Stock Reagents: Avoid putting used tips back into stock reagents to prevent potential contamination of reagents that will be reused.
-
When it may be okay to reuse a pipette tip:
- Loading Gels: Reusing tips is suggested when loading gels, with the recommendation to rinse the tip between samples to minimize contamination.
- First Reagent in a Tube: Reusing tips is acceptable when setting up multiple reactions with the same initial reagent, reducing the number of tips used.
-
General Advice:
- Precautionary Principle: When in doubt, it's advised to discard the tip. Using a few extra tips is considered better than risking contamination and ruining an entire experiment.
The article emphasizes the importance of balancing environmental concerns with laboratory practices, encouraging practitioners to make informed decisions about when to reuse pipette tips based on the specific requirements of their experiments.
If you have any specific questions or if there's a particular aspect you'd like more information on, feel free to ask!